what about this model?



looks much more cool and sexy then the black one

This model was talked about earlier in the thread....


Mike

Originally Posted by wallaguest1

Jussi/kinderkram are you planning on releasing a gimbal like shown in the picture, or are you planning on making a complete gimbal - ready to fit to MR frame?

We will release ready to fit versions in three different sizes.

Will you sell the controller alone?

Originally Posted by recep

Will you sell the controller alone?

Yes!

Will you come to my house and make me popcorn?

Originally Posted by FixedWing172

Will you come to my house and make me popcorn?

Depends on how well you pay....

Will this version of the controller be able to handle the draw of a motor like this:

http://www.rctimer.com/index.php?gOo...5&productname=

And this is my camera:

http://store.sony.ca/webapp/wcs/stor...52921666429167

Cheers,
Andy

Originally Posted by DrEvil

Looks like an orderery dLRK winding, most likely terminated in star config.

Anybody tested an alredy winded motor's kv ?

The attached pic is only 1 example to show you that you'll be getting a nice graphic after calculating...

Originally Posted by robin4

Jussi/kinderkram are you planning on releasing a gimbal like shown in the picture, or are you planning on making a complete gimbal - ready to fit to MR frame?

This is the luxury version being offered by E-Copter who teamed up with Viacopter and Flyduino.
Read post #2

Hi,

the rendering that people use is a basic rendering full of ineptias that we made. It gives an idea, but this is not final design (we try to avoid beeing copied our original designs by asia before we release it.... You will notice lot of mechanical ineptias in this rendering, but it has in some ways the main lines shown.

We will provide maybe 2 different supports, one for front mount and one for under frame mount ?

Viactoper/Flyduino and myself have each our own little mechanics designs, and i don't think there is any kind of competitions as we are simply on 2 different sectors, it's easier to work this way, and much more funny

Sure thing, this 2013 year will be loaded in new stuffs

Best regards,
Fabien

Hi Jazzboy, nop not unless you rewinde it, follow AlexMos rewinding video.

перемотка двигателей, AlexMos Simple BLGC (5 min 38 sec)

a bit detailed question ...would it be possible to turn the stabilzation off via a dedicated switch on the tx? just keeping the manual control of camera tilt

I think a lot of people will use this gopro setup for fpv
but fpv with a perfectly stabilized camera can be very irritating (when its windy for example)
would be nice to have this option for finding the position for a shot and then once you feel good turn cam stabilzation on
I know this is this is something that makes fpv filming really hard with an ecilop for example

Originally Posted by Patscherpofel

a bit detailed question ...would it be possible to turn the stabilzation off via a dedicated switch on the tx? just keeping the manual control of camera tilt

Good thing to keep in mind - I would also like to see that option!