Finally received my 9x and v911! Now i need your help!

helikido · Oct 09, 2012, 09:46 PM

Here's what I need guys to get in the air. As you all know I'm pretty time constricted for bow and I at least want to get the v911 airborne for my bro to mess around with.

I also bought the Tx and rx for my exi 450 pro that I still have not flown.

So here's what's up.

Can you guys pitch in and tell me what all your settings for the v911? And can y'all tell me what darn settings I need to setup for my exi 450 pro with the detrum gy48v gyro and motor? I'd really appreciate it guys!

firstadam2k · Oct 10, 2012, 03:51 AM

There are a set of settings somewhere in the last few pages for the v911 in the v911 pages i am not sure where as the page moves so fast. As for the other heli i am not sure as all i have is the v911.

Makdaddy · Oct 10, 2012, 04:34 AM

I have some settings for the original firmware on my blog (click on my name) - use er9x now. Also there are some settings here that ztoon put up.

Off Route Recalc · Oct 10, 2012, 03:43 PM

With a few slight adjustments the v911 flies right out of the box. I think there is one reverse and you have to sub trim the throttle. Of course you set the trans for helicopter. Binding may be another matter.

1. Set trans to bind
2. Plug in heli
3. Off both
4. Turn on trans normal
5. Plug in heli

That should do it.

Oct 09, 2012, 09:46 PM	#1
helikido Registered User United States, CA, Chowchilla Joined Aug 2009 331 Posts	Finally received my 9x and v911! Now i need your help! Here's what I need guys to get in the air. As you all know I'm pretty time constricted for bow and I at least want to get the v911 airborne for my bro to mess around with. I also bought the Tx and rx for my exi 450 pro that I still have not flown. So here's what's up. Can you guys pitch in and tell me what all your settings for the v911? And can y'all tell me what darn settings I need to setup for my exi 450 pro with the detrum gy48v gyro and motor? I'd really appreciate it guys!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! Help! Burn the Flysky 9x radio, and now shows me 1.1V on the screen	Mc.Daniel	Radios	9	Nov 19, 2012 04:36 PM
Discussion 9x receiver need help	ktgohdt125	Radios	0	Sep 05, 2012 10:36 PM
Discussion Need help for my V911	Recharge	Micro Helis	1	Jun 21, 2012 12:25 PM
Discussion Finally received my lawmate system. Need help!	chonyc77	Video Piloting (FPV/RPV)	3	Feb 19, 2011 06:49 PM
Discussion Learn't my lesson today now I need your help...	jason H	Mini Helis	21	Feb 04, 2007 01:07 AM

RCG Sites

About RCG

Features

Tools

Media

Topics

Oct 10, 2012, 03:51 AM	#2
firstadam2k Registered User Joined Aug 2012 149 Posts	There are a set of settings somewhere in the last few pages for the v911 in the v911 pages i am not sure where as the page moves so fast. As for the other heli i am not sure as all i have is the v911.

Oct 10, 2012, 04:34 AM	#3
Makdaddy He flies-He flies-No, he falls United States, MI, Sterling Heights Joined Jul 2012 519 Posts	I have some settings for the original firmware on my blog (click on my name) - use er9x now. Also there are some settings here that ztoon put up.

Oct 10, 2012, 03:43 PM	#4
Off Route Recalc Registered User United States, ID, Twin Falls Joined Jan 2012 32 Posts	With a few slight adjustments the v911 flies right out of the box. I think there is one reverse and you have to sub trim the throttle. Of course you set the trans for helicopter. Binding may be another matter. 1. Set trans to bind 2. Plug in heli 3. Off both 4. Turn on trans normal 5. Plug in heli That should do it.