Realflight G5 CPU Compatibility Issue

rc_sportpilot · Nov 06, 2009, 04:14 PM

I just received my G5 upgrade from Tower Hobbies this week. I cannot install this on my CPU. Searching the real flight discussion boards I found the following CPU compatibility issue posted by Ryan Douglas:

The following CPUs are affected:
Intel Pentium III or older
AMD Athlon (650 MHz – 1400 MHz)
AMD Athlon XP (1500+ – 3200+)
AMD Duron (600 MHz – 1800 MHz)
AMD Sempron (2000+ – 3300+)
AMD Athlon MP (1000 MHz – 3000+)
AMD Geode NX (667 MHz – 2200 MHz)

If you have these CPUs, G5 will not install. They are working the issue, but there is no work around. Buyer beware.

jbourke · Nov 06, 2009, 04:23 PM

Just an update, KE has the fix, but hasn't released it yet as it is still in testing.

Our apologies for the error.

Jim

petermac40 · 08:44 PM

asd

rc_sportpilot · Nov 06, 2009, 06:44 PM

Quote:

Originally Posted by jbourke

Just an update, KE has the fix, but hasn't released it yet as it is still in testing.

Our apologies for the error.

Jim

Many thanks KE for the quick response and fix. I look forward to the patch.

Obake · Nov 06, 2009, 07:36 PM

Quote:

The following CPUs are affected:
Intel Pentium III or older
AMD Athlon (650 MHz – 1400 MHz)
AMD Athlon XP (1500+ – 3200+)
AMD Duron (600 MHz – 1800 MHz)
AMD Sempron (2000+ – 3300+)
AMD Athlon MP (1000 MHz – 3000+)
AMD Geode NX (667 MHz – 2200 MHz)

If you have these CPUs, G5 will not install. They are working the issue, but there is no work around. Buyer beware.

Never would of though G5 would even run on a PIII.

SteveM732 · Nov 07, 2009, 01:49 AM

Thanks for the tip, I have two systems with CPUs on that list. For now I'm still running G4.5, but there's no point in me rushing out to get G5 till they get the wrinkles ironed out. Of course what I really need is a better computer.

yarsmythejr · Nov 13, 2009, 12:22 PM

I'll be running G5 on my Dell laptop powered by Intel. However, I own three desktop systems all running AMD processors. It's sad to see that they released the software with an obvious disregard to AMD users (and shareholders) out there. Let's hope they fix it soon.

Ordered my G5 Upgrade yesterday. Looking forward to giving it a try ... and so are my boys!

-Lee

yarsmythejr · Nov 17, 2009, 01:42 PM

G5 arrived today. Installed it on my Dell XPS laptop running Windows 7. Installation went smoothly. I guess my processor isn't powerful enough 'cause the program runs a bit choppy but not too bad. Overall, I don't see a huge difference between 3.5 and 5. I feel that the realism is better, especially on landings and take-offs. I probably need another few hours on it before it grows on me. For $80 (upgrade), it's a fair deal. If you are running a faster system, I bet it's really nice.

Obake · 11:09 AM

....

Nov 06, 2009, 04:14 PM	#1
rc_sportpilot Registered User See Latitude & Longitude Joined Feb 2005 2 Posts	Realflight G5 CPU Compatibility Issue I just received my G5 upgrade from Tower Hobbies this week. I cannot install this on my CPU. Searching the real flight discussion boards I found the following CPU compatibility issue posted by Ryan Douglas: The following CPUs are affected: Intel Pentium III or older AMD Athlon (650 MHz – 1400 MHz) AMD Athlon XP (1500+ – 3200+) AMD Duron (600 MHz – 1800 MHz) AMD Sempron (2000+ – 3300+) AMD Athlon MP (1000 MHz – 3000+) AMD Geode NX (667 MHz – 2200 MHz) If you have these CPUs, G5 will not install. They are working the issue, but there is no work around. Buyer beware.

Nov 06, 2009, 06:22 PM	#3
petermac40 Registered User Yardley, PA USA Joined Oct 2004 82 Posts	asd
	Last edited by petermac40; Nov 07, 2009 at 08:44 PM.

Nov 21, 2009, 04:54 PM	#9
Obake Hmm ... Smoke is bad, right? United States, VA, Waynesboro Joined Dec 2005 4,961 Posts	....
	Last edited by Obake; Nov 22, 2009 at 11:09 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion COMBAT in RealFlight G5!	Skaluf	Combat Fuel Planes	9	Nov 19, 2009 11:39 AM
Alert What will this turn FPV to...RealFlight G5	DarkHeli	Video Piloting (FPV/RPV)	11	Oct 20, 2009 09:05 AM
Discussion Dimension engineering BEC / Castle ESC compatibility issue	FLDewey	Power Systems	5	Aug 21, 2009 03:20 PM
Discussion Crystal compatibility issue?	Sunfire	Radios	3	Oct 03, 2007 01:59 PM
Compatibility issue with E-Flite 20amp ESC and Ultrafly D/13/32 Brushless motor!	Ralph_D	Parkflyers	5	May 07, 2005 04:17 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Nov 06, 2009, 04:23 PM	#2
jbourke Administrator United States, OR, Corvallis Joined Nov 1998 5,281 Posts	Just an update, KE has the fix, but hasn't released it yet as it is still in testing. Our apologies for the error. Jim

Nov 07, 2009, 01:49 AM	#6
SteveM732 Registered User United States, OR, Beaverton Joined Feb 2008 1,973 Posts	Thanks for the tip, I have two systems with CPUs on that list. For now I'm still running G4.5, but there's no point in me rushing out to get G5 till they get the wrinkles ironed out. Of course what I really need is a better computer.

Nov 13, 2009, 12:22 PM	#7
yarsmythejr Addicted to RC USA, TX, Houston Joined Nov 2003 2,512 Posts	I'll be running G5 on my Dell laptop powered by Intel. However, I own three desktop systems all running AMD processors. It's sad to see that they released the software with an obvious disregard to AMD users (and shareholders) out there. Let's hope they fix it soon. Ordered my G5 Upgrade yesterday. Looking forward to giving it a try ... and so are my boys! -Lee

Nov 17, 2009, 01:42 PM	#8
yarsmythejr Addicted to RC USA, TX, Houston Joined Nov 2003 2,512 Posts	G5 arrived today. Installed it on my Dell XPS laptop running Windows 7. Installation went smoothly. I guess my processor isn't powerful enough 'cause the program runs a bit choppy but not too bad. Overall, I don't see a huge difference between 3.5 and 5. I feel that the realism is better, especially on landings and take-offs. I probably need another few hours on it before it grows on me. For $80 (upgrade), it's a fair deal. If you are running a faster system, I bet it's really nice.