|Oct 22, 2012, 01:13 AM|
ESC in New FMS big Pitts
I am having a time setting the ESC in my new Pitts, 85amp ESC w/external BEC. Red wire is disconnected from ESC. First time I hooked it up and bound my AR600 I got a couple beeps and whoop de dooes , it was bound. Next following instructions I unplugged battery, turned on TX with throttle stick at full and plugged battery up and after 2 sec and two beeps went down to min. and ESC did it's thing going thru all the correct things like 6 beeps for 6 cells. Everything in plane worked.m After this I did something different , maybe I got into programming. Now when I plug up all I get is one beep but alls well. What is going on? Servo's work, motor works. Is all good. Scared to fly like this. Lions, tigers and bears, OH!! the Saints won, bag off/////zeezee/dave
|Nov 18, 2012, 11:35 PM|
If you are running an ESC with no internal Bec, called an opto, you need to rehook the red wire that goes to the rx. If there is no bec built in, there is no power being sent to rx, but the esc requires the red wire for communication and setting the program.
Your separate bec/ battery or separate battery alone will supply the rx its needed power.
If the ESC actually has an internal bec, and you have removed the red wire to run a separate bec, you will need to rehook it to change any settings. Be sure to remove prop and disconnect the separate bec if you rehook the internal. Doug B
|Thread||Thread Starter||Forum||Replies||Last Post|
|New Product NEW FMS Pitts from BH!!!||aviator4934||3D Foamies||634||Today 09:01 PM|
|Sold New Pitts Bi-Plane LPU in DFW||birdy233||Aircraft - Electric - Airplanes (FS/W)||11||Jul 10, 2012 05:00 PM|
|Sold New in nox OS .61 SF ABC w Tatone Pitts muffler/tools||dankar04||Aircraft - Fuel - Engines and Accessories (FS/W)||2||Jun 08, 2012 04:11 PM|
|Sold FMS 65A ESC - New||kellymacdaddio||Aircraft - Electric - Power Systems (FS/W)||2||May 07, 2012 08:54 PM|
|Sold New FMS big birds/New PZ T28/bats/parts/charger/Tx &RX||cwm333||Garage Sale/Large Lot Ads||5||Jan 14, 2011 03:55 PM|