Do the wooden retract supports for mechanical gear come with the mains and the nosegear supports?

Also where would I find the PVC sheet after I modify
the lower fuse for the supports...

Lastly, would the electric non servo retracts allow me to
use the struts from my mechanical retracts in case I decide to go
electric instead of mechanical? If I need to mod the electric retracts
what do I do, drill out the mechanical struts to fit 3mm wire??

Thanks.

Originally Posted by terrorsound

Do the wooden retract supports for mechanical gear come with the mains and the nosegear supports?

Also where would I find the PVC sheet after I modify
the lower fuse for the supports...

Lastly, would the electric non servo retracts allow me to
use the struts from my mechanical retracts in case I decide to go
electric instead of mechanical? If I need to mod the electric retracts
what do I do, drill out the mechanical struts to fit 3mm wire??

Thanks.

Currently the wooden supports are in two versions; one for electric retracts on the RCLander F-16 and the other for mechanical retracts for the RCLander F-16. They were built by RCLander Factory; the nose section can be built up with from ply as it pretty straight forward box like unit.
We can Special order the PVC sheet painted to match your
RCLander F-16.
Sorry, the mechanical struts will not fit properly on the electric bases. I have not ever attempted a conversation, I would not be able to suggest a sucessful mod.

Hope this answers your questions

Max