OrangeRX RX3S 3-Axis Flight Stabilizer w/DSM2 Compatible 6CH 2.4Ghz Receiver $24.99

lquick · 12:08 PM

I have 2 of these on order and I am wondering if any one has any experience with it. I have been quite pleased with the OrangeRX RX3S 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX) $17.99, but eliminating all the jumper wires will be great.
The reciever sseams to have two antenna mounted at 90 degree

Lloyd

flypaper 2 · Apr 03, 2013, 02:09 PM

Should have mine in the next couple of days too. Two of the version 1 in use in a Zoombi and a Flash 3D. The version2 is in a VTO Pogo scale model. Hope these new ones work as good.

Gord.

lquick · Apr 06, 2013, 06:03 PM

Received mine today, looks great. I had to use aux1 to enable the gyros rather then gear switch.

Lloyd

flitelab · Apr 13, 2013, 10:05 PM

Just trying mine but the remote aux disable doesn't seem to work :-\

flypaper 2 · Apr 14, 2013, 05:51 AM

The Pogo is working fine. I put the other one in the Zoombi and it's working fine. I have no use for the remote as I want it on all the time.No need to turn it off. I could turn it on to see if it works.

Gord.

flitelab · Apr 14, 2013, 06:04 AM

Managed to get the AUX working. Just needed to recycle the power after changing the DIP switch for that as it wont pick up the change otherwise. You can here a few servo cherps with it off however but it does seem to disable the stabilization.

Apr 03, 2013, 11:56 AM	#1
lquick Registered User Joined Feb 2003 151 Posts	OrangeRX RX3S 3-Axis Flight Stabilizer w/DSM2 Compatible 6CH 2.4Ghz Receiver $24.99 I have 2 of these on order and I am wondering if any one has any experience with it. I have been quite pleased with the OrangeRX RX3S 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX) $17.99, but eliminating all the jumper wires will be great. The reciever sseams to have two antenna mounted at 90 degree Lloyd
	Last edited by lquick; Apr 03, 2013 at 12:08 PM. Reason: Duplicate post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale RX3S OrangeRX 3-Axis Flight Stabilizer V1	TAREK.SAADE	FPV/RPV - Equipment and Vehicles (FS/W)	0	Jan 29, 2013 05:17 AM
Sold OrangeRx R610 Spektrum DSM2 6Ch 2.4Ghz Receiver (w/ Sat Port)	shua757	Aircraft - General - Radio Equipment (FS/W)	6	Jan 16, 2013 07:08 PM
For Sale RX3S OrangeRX 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX)	hemiblas	Aircraft - General - Radio Equipment (FS/W)	4	Jan 16, 2013 11:41 AM
Sold OrangeRx R610 Spektrum DSM2 6Ch 2.4Ghz Receiver (w/ Sat Port)	3d astronaut	Aircraft - General - Radio Equipment (FS/W)	2	Jan 14, 2013 01:32 PM
Sold OrangeRx R610 Spektrum DSM2 6Ch 2.4Ghz Receiver (w/ Sat Port)	ae4sh	Aircraft - General - Radio Equipment (FS/W)	2	Jan 10, 2013 08:27 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Apr 03, 2013, 02:09 PM	#2
flypaper 2 Canadian Bacon Kingston, Canada Joined Jun 2004 10,601 Posts	Should have mine in the next couple of days too. Two of the version 1 in use in a Zoombi and a Flash 3D. The version2 is in a VTO Pogo scale model. Hope these new ones work as good. Gord.

Apr 06, 2013, 06:03 PM	#3
lquick Registered User Joined Feb 2003 151 Posts	Received mine today, looks great. I had to use aux1 to enable the gyros rather then gear switch. Lloyd

Apr 13, 2013, 10:05 PM	#4
flitelab www.flitelab.com Canada, NS, Halifax Joined Feb 2010 5,303 Posts	Just trying mine but the remote aux disable doesn't seem to work :-\

Apr 14, 2013, 05:51 AM	#5
flypaper 2 Canadian Bacon Kingston, Canada Joined Jun 2004 10,601 Posts	The Pogo is working fine. I put the other one in the Zoombi and it's working fine. I have no use for the remote as I want it on all the time.No need to turn it off. I could turn it on to see if it works. Gord.

Apr 14, 2013, 06:04 AM	#6
flitelab www.flitelab.com Canada, NS, Halifax Joined Feb 2010 5,303 Posts	Managed to get the AUX working. Just needed to recycle the power after changing the DIP switch for that as it wont pick up the change otherwise. You can here a few servo cherps with it off however but it does seem to disable the stabilization.