|Nov 12, 2012, 01:59 PM|
Su-22M4 Fitter K, with plans
|Nov 14, 2012, 01:09 AM|
Yes, this is google sketchup.
I wonder. Distance between the points of rotation in the wings is large, about 14inches. And, on the plane, they turn only wingtips.
Maybe instead of making mechanism as the F-14
I'll do a separate mechanisms for each wing.
|Dec 02, 2012, 03:38 PM|
Few pictures from building
Wing with kfm2 wing profile 6+3 depron (insulation) foam
And completed model.
This only a prototype. She will not fly. I did it only to examine the correctness of the design and for test gliding.
|Dec 09, 2012, 03:00 PM|
Today I did test glide for different swing wings.
The center of gravity has shifted to about 2cm (0,8inch) to the rear for the minimum wingspan ..
Position 0 - max wingspan CG is 425mm (17in) from the back
Position 1 - min wingspan CG is 405mm (16,2in )from the back
I wonder if in the final model will have some meaning.
Maybe is sufficient a small adjustment with elevator.
|Feb 19, 2013, 02:21 AM|
I want to do vertical stabiliser like in real plane, as panel.
I have seen this solution in F15 by GWS.
I use 9g servo to this.
What do you think, is would be good? Maybe it's better to give a stronger servo?
I want to control plane only by elevons. There would not ailerons.
|Mar 04, 2013, 03:05 AM|
I want to do this painting.
I finished the tail.
It stiffen 1.6 mm plywood on both sides. Servo is in block of balsa.
In centerwing section will be reviewed by the electronics.
And that's all for now
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Su-17 Fitter||Eddie P||Pusher Prop Jet Models||48||Apr 24, 2013 01:44 AM|
|Build Log||new jet su-7 fitter||mrshea||Pusher Prop Jet Models||1||Mar 13, 2011 03:55 PM|
|Build Log||EPP SU-22 Fitter||Mr. UD||Pusher Prop Jet Models||3||Jun 16, 2009 09:17 PM|
|Su-22 Fitter drawings?||Huckebein||Electric Ducted Fan Jet Talk||6||Mar 21, 2005 03:09 PM|
|O.K. I'm Building the SU-31 Profile and need some help||Cary Reeves||Foamies (Kits)||2||Oct 05, 2004 11:34 AM|