|Aug 18, 2012, 05:00 PM|
looking for high AWU frames
i'm looking for a new frame for my fpv rig. the AUW is expected about 2.5 KG or below... arm span about 600~700mm. quad setup
currently the frame i found might be fit is the Turnigy HALhttp://www.hobbyking.com/hobbyking/store/__22732__Turnigy_H_A_L_Heavy_Aerial_Lift_Quadcopte r_Frame_585mm.html
but the frame itself is already about 800g.. So I'm looking for something that can take up to 2.5kgAUW and the frame itself is lighter
|Aug 18, 2012, 07:20 PM|
I am using this https://www.mikrocontroller.com/inde...roducts_id=602 which is very light and a bit expensive.
My AUW is usually 2.1kg to 2.5kg depending on the camera I use.
|Aug 18, 2012, 09:42 PM|
that cost is acually ok. since pretty much CF are close to same price.... but i guess it will cost more to ship to US....
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Looking for small high quality zoom camera||Eric Tessmer||Aerial Photography||2||Jul 23, 2012 10:20 AM|
|Wanted Looking for a 20cc high wing plane||steveo64||Aircraft - Fuel - Airplanes (FS/W)||2||Jul 23, 2012 07:28 AM|
|Discussion looking for dealers in your region for our high quality brushless motors ,ESC, Servo||jeffrey20021||Vendor Talk||3||Jul 04, 2012 10:17 PM|
|Discussion High Tech High Senior Project - Looking for Help & Suggestions!||hth.uav||Electric Plane Talk||13||May 16, 2012 08:32 AM|
|Sold Looking For A High Speed Needle for a Moki 1.80-2.10||stevster||Aircraft - Fuel - Engines and Accessories (FS/W)||6||Mar 05, 2012 06:37 PM|