Joined Dec 2012
Quadrotor power system
I am currently in the process of building a quad-rotor. I just wanted to check to see if these parts would work well together. Hobbyking support wasn't very helpful.
Any help is appreciated!
Your selected motor is totally overloaded with your selected prop and a 3S Lipo. The motor weight is
24 gram. A motor with 24 gram is able to handle about 24 gram * 3W/gram, that means an input power
of about 72 W. I would use your motor only with a 2S Lipo. In the attachment i have a calculation for a 2S and a 3S Lipo.
The input power of the motor is shaft power / (motor efficiency / 100). With 2S your quadrocopter will have a
max thrust of about 1.2 kg (2.6 lbs). That means that the AUW of your quadrocopter should not exceed 0.45 lbs
for a good performance.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Human powered quadrotor!||alevesque||Multirotor Talk||1||Sep 05, 2012 09:51 AM|
|Discussion||DJI quadrotor stab system testing||sidneyw||Multirotor Talk||16||Jul 31, 2011 05:22 PM|
|Discussion||Attempting to make an autonomous control system for my quadrotor||Reservation||FPV Talk||3||May 08, 2010 07:14 AM|
|Discussion||help in chosing power system for Quadrotor.||brij||Power Systems||11||Feb 08, 2009 09:55 PM|
|Discussion||help in chosing power system for Quadrotor.||brij||Power Systems||0||Jan 16, 2009 07:50 PM|