Hi,Guys!
Fitec RC model here,
our products mainly including:
micro servo
small servo
standard servo
large servo
analog,digital servo,HV servo
180,360 degree servo
New programming servo
servo for heli,airplane,boat,1/5,1/8,1/10,1/12 rc car
servo for robot
alloy arm,
gear arm,
bearing and so on,
And we also do OEM business.
Good news!Our new programming servo will be available in one week
If there is any question about us or our servos, please kindly send email to us at: jenny.fitecrc@gmail.com, Many thanks!

You may contact www.fitecrc.com for our products.

Dear , your products is excellent, i am thinking of to place a trial order.

Hi,i have test your servos,we are building one of it in our test car and race it Last race on Sunday 9June.
its functions very good ,it is fast ,strong and centering is perfect .
none of them is chattering round zero like other bad servos
i am very satisfied and start selling them here in Netherlands.
this a nice alternative for our racers,I think.

Looks awesome!

Can you tell me how to order?

Where is your shop?

Originally Posted by chanlauer

Dear , your products is excellent, i am thinking of to place a trial order.

Dear,Thank you for your support.

Welcome your first trial order!

Originally Posted by limspeedracing

Hi,i have test your servos,we are building one of it in our test car and race it Last race on Sunday 9June.
its functions very good ,it is fast ,strong and centering is perfect .
none of them is chattering round zero like other bad servos
i am very satisfied and start selling them here in Netherlands.
this a nice alternative for our racers,I think.

Yes,Dear limspeedracing,Our FS5679M and FS5478M is newly for rc car,I am glad to hear that you like our servos.

Originally Posted by rcfans60

Looks awesome!

Can you tell me how to order?

Where is your shop?

Dear Rcfans60,
We can accept Payment:Paypal,west union,T/T
- warrantyne year warratny if quality problem
- Sample Availability / Cost:sample is available,price is same as order price for test
- Packing Details:full packed with 1 piece servo and 1 bag servo arm in carton or plastic bag
- Minimum Order Quantity:10 pieces
- Delivery Lead Time:3-5 days
-ShippingHL,EMS,FedEx.....
You can choose your favouirte servo form our website www.fitecrc.com.
Once receipt of your payment,we will arrange delievery in 3 working days.

I have an Ultimate 20-300 with programable servos. The rudder servo chatters like crazy. Have swaped three receivers, changed servo extensions 4 times, and changed 3 programed servos with no luck. What am I doing wrong? Remove the programed servo from the rudder, and replace it with a standard one, and everything works well, but I am afraid of overloading my BEC rlcarroll@nvc.net

Originally Posted by rlcarroll

I have an Ultimate 20-300 with programable servos. The rudder servo chatters like crazy. Have swaped three receivers, changed servo extensions 4 times, and changed 3 programed servos with no luck. What am I doing wrong? Remove the programed servo from the rudder, and replace it with a standard one, and everything works well, but I am afraid of overloading my BEC rlcarroll@nvc.net

Hi,Thank you for your information.
How is your max current of your BEC?
What is the torque of the programmable servo?

The ESC is a 40 amp Pro switch mode BEC brushless ESC. Continuous current: 40 A. Max burst current: 55A(15 sec) Uses a 3 cell Lipo 11.1V 2200 MAH. Spectrum programable digital sub-micro servo,DSP75:torque:19 oz/in@4.8v, speed.11 sec/60 deg @4.8 v. I called Horizon Hobbies, and discussed going to a non programable servo which I had tried with the rudder that eliminated all chatter to make sure the servos would not overload my BEC, and they recommended that I use the 7.6 gram DS76 sub micro servos to replace the programable ones. Hoping this works. will know by tomorrow when they arrive.
Rob

Hi,
We look forward to your updates.

Please see Fitec servo's different packing picture,If do OEM,We can design your custom style as your request.

Interesting!

Originally Posted by limspeedracing

Interesting!

Yes! Totally interesting. I have fitec servo in my 1/8 car and it is very good. You can take a look at my video with it:

Fitec FS5513M digital servo in VRX 2 (0 min 40 sec)

and here is first test drive with it (BTW car is powered on 4s):

Riverhobby VRX 2E 4S RC buggy (2 min 11 sec)

Hi.
More choice of monitor share with everyone.


http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


But who can tell me where to find the blinds to block sunlight?