|Jun 25, 2011, 02:54 PM|
United Kingdom, England, Stockport
Joined Sep 2007
parkzone t-28 thrust angle
My T-28 has had a rough week! First, I was woken the other night to find that someone had broken into my garage and was walking down my back garden with the T-28 under their arm! Fortunately they dropped it when I banged on the window, and they did a runner. It now probably has the unique distinction of being the only t-28 which has been fingerprinted!
Then tonight I went to fly. When I got to my flying field it was clearly too windy, but....I flew it anyway. On approach to landing at about 15 feet the wind changed direction and a strong gust flipped the trojan over coausing a nose first entry. The damage is not bad at all, nothing that a bit of epoxy and tape didn't fix in a few minutes. One of the 4 lugs on the motor mount has snapped though, so I've just ordered another. Looking at the plane, you can see the foam on one side of the fuse at the front has compressed ever so slightly as one of the decals is now slightly "rippled"
When I fit my new mount I want to make sure that this compression hasn't altered the angle of thrust significantly.
Does anyone know what the angle of thrust should be, and can anyone tell me a good way to measure it?
|Jun 25, 2011, 04:48 PM|
I don't think it is all that critical with this plane. Just put it back together, make sure that nothing is going to come loose, and go fly. Eventually it will be your beater/backup plane that you won't be afraid to fly if the weather is bad or you break something else.
I ripped the wing off of my T-28D once and ripped off the nose behind the firewall twice (and vertical stab that third crash). Two days after the 3rd crash it was flight worthy. The nose did get a little shorter playing lawn dart twice, but I just tighted up the clevis for the front wheel so it steered straight.
It still flies fine today. When I accidentally chopped its canopy working the sticks (oops, including throttle) after I let go of it following a prop test, I took that as an opportunity to mount a keyfob camera. I screwed a plastic milk bottle cap secured with foam safe CA to the seatback and use Velcro to attach the camera.
Repair parts since new: 2 cowls, 1 motor mount (less than $20 total) plus white Gorilla glue, Testers gray paint stick, blue or black Sharpie.
|Jun 26, 2011, 03:02 AM|
Yep it is not that critical i think. I also list my nose, exactly like Efflandt. It has even more downthrust and a bit less right thrust. But i can't realy say that i noticed a difference. The only difference was the weight of the tape and glue :P
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Video||Parkzone trojan t-28 first flight afther crash||Anda Inc.||Electric Plane Talk||2||Dec 06, 2012 10:09 PM|
|Discussion||Thrust angle||crobar||Power Systems||8||Mar 22, 2011 11:32 PM|
|Question||Help with motor thrust angle||Bugman Jeff||Flying Wings||5||Mar 13, 2011 02:02 PM|
|Discussion||What to do with parkzone t-28 electrics||captaintomo||Electric Plane Talk||5||Mar 05, 2011 01:36 PM|
|Discussion||Angle of thrust question on T-28 Trogan?||Swaneyjoe||Electric Warbirds||1||Jun 01, 2010 12:16 AM|