|Jul 20, 2004, 10:25 PM|
Crooked Crutch: Hole-free canopy mounting
After trimming down my stock Corona canopy to fit Matt's Crooked Crutch, I didn't like the idea of the aluminum canopy standoff sticking out thru the sides. Here's a cheap, simple way to do it without any holes:
A. Mount the aluminum standoff and measure the overall length (about
B. Remove the aluminum standoff and replace it with a same-length piece of 4-40 threaded rod, aluminum tube, small nyrod, wooden dowel, or left-over carbon fiber pushrod. Fasten it in place with CA or a couple of 4-40 nuts or whatever. You could even use the original aluminum standoff if you prefer.
C. From scrap canopy material, make up a couple of canopy retainers as shown in the following drawing. Adjust the dimensions to match whatever standoff you use. It took me two tries to get the first one to come out right, but hey, it's leftover scrap material, right?
D. Once the canopy is trimmed and fitted, place it in position and mark inside the canopy where the ends of the standoff meet the inner surface of the canopy.
E. CA the canopy retainers in position, with the bottom of the 'U' shaped bends toward the rear, so that the ends of the standoff fit inside the 'U'. The canopy can be easily removed by slightly spreading the sides to slide the retainers off the ends of the standoff.
(Sorry if the drawing lost some of its detail in translation froom DXF to JPG)
|Jul 21, 2004, 07:53 AM|
Joined Jul 2003
Wow, DXF files for a plastic tab? And you guys say I have too much time on my hands! Looks like there is at least one other person with lots of thinking time on their hands!
|Jul 21, 2004, 11:51 AM|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold Bt CORONA CROOKED CRUTCH WITH CANOPY CHEAP!||RabelRouse||Aircraft - Electric - Helis (FS/W)||0||Oct 24, 2006 08:26 PM|
|Stealth Crutch canopy mounting.||Heli Mod Man||Electric Heli Talk||6||Sep 29, 2004 10:24 PM|
|Mounting larger Digital Servos on Crooked Crutch||Orion_V||Electric Heli Talk||20||Aug 31, 2004 11:42 AM|
|Crooked Crutch Canopy Mounting||Orion_V||Electric Heli Talk||16||Jul 14, 2004 12:36 AM|
|Crazy Crutch canopy mounting||Xnaron||Electric Heli Talk||1||Jan 25, 2004 02:09 PM|