HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 21, 2012, 02:44 AM
Suspended Account
Joined Jun 2012
47 Posts
New Product
NEW!!!HOT!!!Fi8612M,Full metal case Standard HV programmable servo

Fi8612M,Full metal case Standard HV programmable servo from Fitec rc model
Features
-Standard digital metal gears servo、2BB
-Corless moter
-All Aluminum alloy case
-Waterproof
-Operating Voltage:6~7.4Volts
-Interface: (like JR)
-Wire length: 30cm

Servo programmable function
1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit, and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12.Read and Write Servo Data

Full Packaged
-Servo×1PCS
-Servo arm×1 bag
-GW: 124g

Fi8612M:
Size: 40.0*20.0*37.5 mm
Weight: 73g(2.58oz)
Speed: 0.12sec/60°(6V)
0.09sec/60°(7.4V)
Torque: 10.2kg.cm/141. oz.in(6V)
12.8kg.cm/178.1 oz.in( 7.4V )
Application:1/10Car, Boat, Robot

Fi8622M:
Size: 40.0*20.0*37.5 mm
Weight: 73g(2.58oz)
Speed: 0.17sec/60°(6V)
0.15sec/60°(7.4V)
Torque: 18.9kg.cm/262.9 oz.in(6V)
21.3kg.cm/296.3 oz.in( 7.4V )
Application:1/10 1/8 Car, Boat, Robot


Samples are available to test,if you are interested in,welcome your first trial order.

Contact jenny.fitecrc@gmail.com or www.fitecrc.com
hobbyfitec is offline Find More Posts by hobbyfitec
Last edited by hobbyfitec; Jun 21, 2012 at 04:36 AM.
Reply With Quote  (Disabled)
Sign up now
to remove ads between posts
Old Jun 26, 2012, 03:33 AM
Registered User
Joined Jun 2012
12 Posts
Thank you for your information of latest Servos.

May I know more about "Programmable function" ?

Do you have any instrution manual of the function ?Is them all full metal case?
limspeedracing is offline Find More Posts by limspeedracing
Reply With Quote
Old Jun 26, 2012, 04:05 AM
Suspended Account
Joined Jun 2012
47 Posts
Quote:
Originally Posted by limspeedracing View Post
Thank you for your information of latest Servos.

May I know more about "Programmable function" ?

Do you have any instrution manual of the function ?Is them all full metal case?
Thank you for your attention!

Yes,The new programmable servo is full metal case as picture shows.
We have software for instrution manual of the function.
hobbyfitec is offline Find More Posts by hobbyfitec
Last edited by hobbyfitec; Jun 28, 2012 at 09:53 PM.
Reply With Quote  (Disabled)
Old Jul 02, 2012, 03:33 AM
Suspended Account
Joined Jun 2012
47 Posts
PC programmer for Fitec programmable servo




hobbyfitec is offline Find More Posts by hobbyfitec
Reply With Quote  (Disabled)
Old Jul 02, 2012, 10:36 PM
Suspended Account
Joined Jun 2012
47 Posts
New Fitec Logo



Aboove is our new servo logo.
hobbyfitec is offline Find More Posts by hobbyfitec
Reply With Quote  (Disabled)
Old Jul 05, 2012, 02:49 AM
Suspended Account
Joined Jun 2012
47 Posts
More information about programmable servo

Your new products are quite interesting. Could you provide a bit more information?

1. USB Programmer — what is this in a nutshell? Is it FTDI USB-Serial converter or what.

Our USB Programmer picture as follow. It is use for programming FT programmable servo.



It is use USB HID agreement, Connecting PC software and servo to communicate.
PC software PROGRAM MODEL as follow.


2. What protocol is used for programming? What the chip is inside: ATmega, ATtinty?
The protocol is compatible with Robotis Dynamixel communication agreement, however, our memory control table has some difference between its. The chip is Atmega.

3. Are they standard range: 180° rotation servos with physical limits?
Yes, they can programmed 180° rotation.and with physical limits.

4. What is “Failsafe mode”?
In selecting FAIL SAFE “ON”, the servo will rotate to a user programmed FAIL SAFE travel point when lose the receivers signal during normal operation.

5. What are Center, End and Failsafe points in your terms?
It is the EPA setup, users can customize the center point and left/right servo travel end points.


P.S. I see you're interested in your product line extension. As an opinion of our company it would be a killer-product if you'll introduce servos with feedback feature (what angle is my servo currently in?) and/or servos with shared bus so that I can connect one servo to another in a chain and to control any of them using just one cable (likely to be 4-wire cable).

Up to now our programmable servo is base on RC servo, however, we can extend our servo to use for ROBOT with shared bus, to control any of them using just one cable(include power wire is 3-wire cable). We can exchange more comments if you are interested in.
hobbyfitec is offline Find More Posts by hobbyfitec
Last edited by hobbyfitec; Jul 05, 2012 at 02:58 AM.
Reply With Quote  (Disabled)
Old Jul 13, 2012, 04:27 AM
Suspended Account
Joined Jun 2012
47 Posts
How to connect the servo with PC and programming unit











hobbyfitec is offline Find More Posts by hobbyfitec
Reply With Quote  (Disabled)
Old Jul 14, 2012, 12:28 AM
Suspended Account
Joined Jun 2012
47 Posts
hobbyfitec is offline Find More Posts by hobbyfitec
Reply With Quote  (Disabled)
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DOMAN RC new programmable HV digital servos springrc Radios 1 May 15, 2012 08:54 PM
New Product GWS S03N3 Metal Case Metal Gear Standard Size Servo gws roger Electric Ducted Fan Jet Talk 2 Jul 11, 2011 10:41 AM
Discussion GWS S03N3 New All Metal Case Metal Gear Standard size Servo gws roger Electric Heli Talk 4 Jul 05, 2011 01:55 AM
New Product GWS S03N3 New All Metal Case Metal Gear Standard size Servo gws roger Electric Plane Talk 1 Jun 06, 2011 12:18 PM
New Product GWS S03N3 All Metal Case Metal Gear Standard Size Servo gws roger Foamies (Scratchbuilt) 0 May 06, 2011 03:06 AM