|Sep 19, 2011, 04:15 AM|
Aluminum servo arm for the GWS S125 1T 2BB servo?
I'm making a heavy duty pan-tilt mount to be mounted underneath an airplane and am using the GWS S125 1T 2BB servo for this. It came, as expected, with a nylon winch "arm". Are there any aluminium servo arms available that fits this servo that I can use instead?
As it is now I'll have to cut the nylon mount and attach it to the aluminum frame using only screws. If I had a aluminum servo arm it could be attached using both screws and epoxy which would be preferable.
Btw, are there any plans on making a similar but more lightweight +/- 180° servo?
|Sep 19, 2011, 04:32 AM|
Aluminum servo arm for the GWS servos
Aluminum servo arm for the GWS S125 1T 2BB servo should use the same type as for S03 standard size ( same as Futaba ).
Now we have 6 different types of Aluminum servo arms.
Pico: 17X7X4mm $3.00
Naro: 17X6X4mm $3.00
Micro & Park: 27X9X6mm $3.50
Standard S03: 27X9X6mm $3.50
S04 Jumbo: 34X11X7mm $4.00
Giant S666: 33X11X7mm $4.00
|Dec 08, 2011, 09:50 AM|
Canada, QC, Montreal
Joined Dec 2011
And where can the Giant S666 aluminium sewrvo arm be found?
I had no luck looking at caliber hobby, and could not find any compatible heavy duty arm/horn for my S777...
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion GWS S125 servo can help the camera movement with more angle||GWS4CEO||Aerial Photography||1||Oct 29, 2011 03:50 AM|
|Sold Maxx 3" Aluminum Servo Arm for Hitec - NIB - $12 shipped||dtmtoyz||Aircraft - General - Miscellaneous (FS/W)||1||Aug 24, 2011 05:11 PM|
|Wanted GWS S125 1T Servo||Art Newland||Aircraft - General - Radio Equipment (FS/W)||1||Oct 27, 2010 03:45 PM|
|Sold SOLD FS or WTT: GWS 125-1T/2BB/J Servo 2x SOLD||henkvdw||Aircraft - General - Radio Equipment (FS/W)||0||Aug 06, 2010 03:35 PM|
|Discussion Technical experiments about GWS S125 1T||granpierre||GWS (Grand Wing Servo)||1||Jun 07, 2009 11:50 AM|