Starting this thread to promote our boat club's upcoming swap meet at Ackerman Park on Sunday 11/18/12.
While at it I'll list some of the items I'll have for sale.

1st up is a 1/8 scale Cermark F-16 EDF as a plug n fly. Includes full Cermark retracts - struts - wheels - brakes package. Neu 1527/1.5Y, CC 110 HV esc. Schubler DS94 (120 mm) carbon fiber fan Mixture of JR and Hi-Tec metal gear servos. Add your 7 channel RX and 12s lipo to be ready to fly. Cash n carry price at the swap meet $1200.00 I will not ship this model so don't ask.

More items to come as soon as I get the photos shot.

See you there bill, hopefully this year it won't be so cold and windy!

Originally Posted by Mattsrcking

See you there bill, hopefully this year it won't be so cold and windy!

I hear that. We're hopng by choosing mid Novenber instead of February to avoid at least that bone chilling cold. It would be great if it's like this weekend is going to be.

I agree, great choice to change the timing.. This weekend is gorgeous, maybe this time i can keep most of my places I'm going to sell outside the vehicle! Do you still have any smaller jets for sale?

Electric conversion almost completed but I lost interest after taking the planned 2028 for use in my Falcon cat.
Sponsons have been cut for battery hatch and battery mounting trays installed in them.

Hull and hardware including WRP 2028 rail mount and hi torgue metal gear steering servo. Swap meet "cash n carry" price $200.00.

Prefer not to ship but would consider it at buyers expense. Buyer would also have to cover paypal fees.

Here's a little clip of Hugh's Llumar (same hull) that I shot yesterday (11/11/12). Running a Neu 1527/1.5Y on 10s

11 11 12 Miss Llumar (2 min 4 sec)

Originally Posted by Mattsrcking

I agree, great choice to change the timing.. This weekend is gorgeous, maybe this time i can keep most of my places I'm going to sell outside the vehicle! Do you still have any smaller jets for sale?

About the only small EDF I have left is an old Phase 3 Squall. I still fly it on occasion and it's too beat up and ugly to try to sell.

Large Model Tech Yak 54 120-160 glow size plane converted to electric.

E-Flite Power 90, Turnigy 100 amp Sentillion HV esc. Hitec 645-MG servos on all control surfaces. 2200 ma rx pack.
Never crashed although there is a small amount of damage to the left wheel pant that was incurred during a cross wind landing.

Bind n fly with Spectrum AR6200 rx and one 8s set of 5000 ma 30c lipos. $600.00

Plug n fly w/o RX or lipo flight packs $500.00 (cash n carry prices)

Local pickup only. I will not ship this model.

Think this video is from the last time I flew it. I'm just not much into aerobatics any more. It's also the one that scuffed the wheel pant.

WattFest08.wmv (5 min 57 sec)

H&M Rigger hull and hardware. I ran this one for a while and decided I didn't really care for riggers. Set up for a drop in of a "spec" motor & esc. (I ran a UL-1 motor and esc when I was running it)
Includes Hitec 225-MG steering servo and flex cable. No prop.

SOLD

Would consider shipping at buyers expense. Buyer to cover all paypal fees as well.

Bill looks great my friend...wish I cud be there...well maybe, id end up needing a uhaul to bring back all the boat stuff id end up with ....I do like that rigger...its sharper in pics than how you described it to me on phone...u got hydrophobia when you caught catatonic disease .... good luck at the sale and all the best my friend...if you still have the rigger after the sale give me a call and we will work out the details.... DJ

I'll be there with LOTS of boat stuff. Due to my health I had to quit FE racing last year. I still have a huge bunch of shafts, rudders, fins, struts, mounts, motors, esc's, etc. etc. etc.

Also have a couple of FE riggers to sell and a big 1/8 scaler, Dr. Toyota, ... and maybe some more. BE THERE! BRING $$$! :-)

Here's something I would ship. I bought this used some time back and never have used it other than to test it for proper operation.

Futabe 2.4 3 PKS tx - R603 rx. with a lipo rx pack upgrade. Will also include original AA cell holder and 120 page manual that I printed from a PDF.

$175.00 shipped to the lower 48. Paypal accepted.

I bought this airframe as part of a package deal a month or so ago. Ordered 4 of the NTM 28-26 1200kv 250 watt motors and 4 Turnigy Plush 25 esc's with intentions to build it but haven't gotten around to it yet. My HT-FPV is still working well and don't want to drop the $$ for another Naza right at the moment.

Will sell just the airframe for $65.00 "cash n carry".
If you want the motors and esc's the package goes to $150.00 "cash n carry"
Willing to ship with addition of shipping costs and paypal fees.

Will not sell the motors and esc's by themselves as they are the same as the ones on my HoverThings quad and would make good spares. Although not NIP, the motors and esc's have not been run other than a short power up to set esc's and motor direction.

Nice stuff guys .....Sailr I really like your shovelnose..sure wish yall were not so far away... keep the pics coming guys yall got me drooling (more than normal) .. DJ

Originally Posted by olwarbirds

Nice stuff guys .....Sailr I really like your shovelnose..sure wish yall were not so far away... keep the pics coming guys yall got me drooling (more than normal) .. DJ

The 18th is "kind of" close to Thanksgiving DJ. Sounds like a perfect time of year for a little holiday road trip.

This was my introduction to quads but it doesn't get flown any more. Probably 20 flights on the unit, Still has the original props on the quad and the spares it came with. Everything it came with new plus 1 extra battery.

Cash n carry price at the swap meet. $75.00
Shipped in the lower 48 with paypal payment $90.00