|Nov 06, 2011, 01:56 PM|
Joined Jul 2006
Guardian Hanging Elogger and OSD Help Please!!!
I was trying to setup the guardian stabilizer. I connected it to my OSD and updated to the latest firmware versions (10.04) and set the on screen menus to turn on the stabilizer from the data recorder software. Now the elogger is no longer recognized in windows. It shows up as failed in device manager. If I start the data recorder software and plug in the elogger the data recorder stops responding. When viewing the transmitted video signal the OSD shows stabilizer discconnected at the top of the screen. It seems like the elogger won't active USB mode now because it can't find the guardian. I have it connected correctly to the OSD and the green light flashes on the guardian. The lights on the elogger no longer come one.
How can I reset the data logger if I can't get it connected to the software? This seems like a bug in the programming. The usb function shouldn't be blocked because the stabilizer is configured but not found. I have a feeling if I could turn it off the OSD and logger would start working again.
I guess the guardian guards well. If the plane is grounded it can't crash. Not really the type of protection I was looking for though.
|Nov 07, 2011, 07:19 AM|
|Nov 08, 2011, 05:18 PM|
nemesis43, if the eLogger's LED does not blink when the Guardian is connected, there is an issue with either the connection, the cabling, or the hardware.
Please do this:
1) check that the OSD or Guardian is not connected incorrectly (backwards connection, off by one connection, etc.)
2) if those are correct, please connect either the OSD or the guardian to the eLogger, and determine which of them is causing the LED not to blink. The one that causes this either has a broken wire, or has been damaged.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Cool||Guardian stabilization module for your OSD Pro - $54.99!||billpa||FPV Equipment||1981||Jun 18, 2014 05:29 PM|
|Question||OSD Pro, eLogger V3, GPS V4 problems updating firmware in OSD Pro||jbfoamy||Eagle Tree Systems||23||Jun 02, 2012 03:59 PM|
|Sold||Complete EagleTree OSD Pro and guardian.||bakchos||FPV Equipment (FS/W)||9||Oct 05, 2011 12:40 AM|
|Sold||Eagletree OSD Pro/Elogger V4/GPS Expander||RaptorAP||FPV Equipment (FS/W)||10||Sep 16, 2011 10:45 PM|
|Help!||Noob needs help wiring elogger-v3/OSD Pro||Mykro||Eagle Tree Systems||7||Jun 25, 2010 01:59 AM|