|Nov 17, 2012, 04:23 PM|
Joined Jan 2008
dx7 flaps set up
I am putting together a senior telemaster plus and I am setting up the flaps. I Want to use 60% epa up and down both, I am mixing it on program 5 so that if I trim the flap, the other servo gets trimmed as well. I am mixing the gear channel to aux 1. Aux 1 works just fine for flaps with the 60%EPA, but the gear channel is still moving 100% each way. I went in and turned the EPA on the Gear channel to 0% up and 0% down to kill the gear, but cant figure this out.
So I guess the question is, how do you mix two channels together such that the slave channel keeps the Master channels EPA settings?
If you can offer some help, that would be great!!
|Nov 17, 2012, 10:03 PM|
Short answer - don't use pmixes to do this
Turn on "Flaperon" mode in the wing type menu and use the Flap System menu to make adjustments.
edit - I see - you want separate flaps, not flaperons
Ignore that advice
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Flaps! how to set them up on my DX6i||madon37s||Radios||16||Aug 05, 2012 03:32 PM|
|Discussion||What is the best eay to set up landing flaps?||micronracer||Hitec/Multiplex USA||4||Apr 30, 2012 08:05 PM|
|Discussion||What is the best way to set up landing flaps?||micronracer||Hitec/Multiplex USA||3||Apr 28, 2012 03:32 PM|
|Discussion||how to set up flaps on 9CAF?||Canada Goose||Radios||0||Mar 30, 2012 09:27 AM|
|Help!||GY401 SET-UP - DX7 - tail set up... help :(||d1cky_kds||Electric Heli Talk||16||Jun 27, 2011 06:10 PM|