HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 04, 2014, 12:31 PM
Registered User
deno6031's Avatar
Turkey, Izmir
Joined Oct 2011
767 Posts
Discussion
Boscam tr1/ Rctimer imago aio camera discussion

Hello everyone, have you seen this camera/vtx combination?


http://www.rctimer.com/product_1101.html

http://www.banggood.com/Boscam-TR1-1...-p-919492.html

Has anybody have it? I wanna buy one, but i'm not sure how it would behave on fast light changes, and if it has any latency issue or not. Those 2 are the main problems with the live out feed of hd recording cameras.

My other concern is how to connect a osd, i have a e-osd which is a must on my quadrocopters, maybe from the av out cable which is shown on the pictures, or maybe possible with some soldering job?

I want to use this camera so badly for my minion quadrocopter, it would save me more than 60grams, which is a lot for me. But would't make any sense if there a issues with latency or light adaptation.

Please let's discuss this camera here

Dennis
deno6031 is online now Find More Posts by deno6031
Reply With Quote
Sign up now
to remove ads between posts
Old Jun 05, 2014, 03:42 PM
Registered User
deno6031's Avatar
Turkey, Izmir
Joined Oct 2011
767 Posts
the only footage i have found, isn't bad

Boscam TR1 Solar Test in the dawn RAW (3 min 3 sec)
deno6031 is online now Find More Posts by deno6031
Reply With Quote
Old Jun 10, 2014, 04:49 AM
get to the chopper now !
tsooi's Avatar
The Netherlands, NB, Drunen
Joined Sep 2013
578 Posts
I also wonder if you can rotate it 90 degrees so the height is 36mm ?
tsooi is online now Find More Posts by tsooi
RCG Plus Member
Old Jun 14, 2014, 03:13 AM
Registered User
deno6031's Avatar
Turkey, Izmir
Joined Oct 2011
767 Posts
That world be my #1 on the wishlist, because that would make a lot more sense, having microsd card and the cables on the sides and the antenna on the top or bottom.
deno6031 is online now Find More Posts by deno6031
Reply With Quote
Old Jun 16, 2014, 02:44 PM
Registered User
Deadstick 8409's Avatar
Joined May 2010
956 Posts
I wonder if it has a output/input header so that you can insert an OSD in front of the Tx.
Deadstick 8409 is offline Find More Posts by Deadstick 8409
Reply With Quote
Old Jun 18, 2014, 01:52 PM
Registered User
deno6031's Avatar
Turkey, Izmir
Joined Oct 2011
767 Posts
it has it, you can connect an osd to it, foxtech declared that on their video. But still no tests about it's live out capabilities....
deno6031 is online now Find More Posts by deno6031
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Boscam AIO Goggles problem RobDog FPV Equipment 5 Mar 27, 2014 12:02 AM
Help! Rctimer Crius AIO v2 mfc123 Multirotor Electronics 1 Oct 14, 2013 03:21 PM