|Aug 16, 2012, 10:56 PM|
EZE-KOTE: Epoxy resin alternative?
So I noticed an article in my Sept issue of the German mag ModellWerft, where a water-based resin was being used instead of epoxy or polyester resin for fiberglass work.
The stuff is "Eze-Kote" from the UK hobby materials company Deluxe Materials:
In this video taken at the Weak Signals Show, the material is described as a light-cured resin... it seems to be viscous, and is used first to seal balsa, then to apply glass over the balsa:
It is claimed to be quick drying and easy to sand, and not a strong as epoxy (but maybe strong enough for sealing a hull? No idea how clear it is, or if it would take varnish or clear-coat well, for our mahogany wonders... but likely good for painted hulls.
Not cheap, Horizon sells it for $20 for 500ml (about a pint).
But I'd pay that for the ease of sanding, I HATE sanding epoxy!
Anyone try it yet?
|Aug 16, 2012, 11:19 PM|
Look at this.
|Aug 19, 2012, 08:13 AM|
?? The link above says that eze-kote IS wbpu, and it seems to work fine for glassing over wood. Why do you say it isn't good? Not challenging you, just curious.
See the first link, Deluxe is a UK firm. And Krick repackages it.
|Aug 19, 2012, 01:16 PM|
So I mentioned (above) using a hardener in WBPU... I did my wood stairs with Carver Tripp wbpu many years ago, and added a small vial of optional hardener which they recommended for floor usage... and there's absolutely no wear-through on those steps today.
But I think Carver Tripp is gone now, and I don't see any hardeners offered with the Minwax products offered at Home Depot... but they do have WBPU formulated for floors. I suppose this is a harder grade? Which should be good for both sanding and strength.
And others offer WBPUs formulated for marine and outdoor usage, and I've even seen some claiming "high build", which could be good for filling glass.
Nothing against our friends at West Systems, but I'd sure like to try an easier-sanding solution than epoxy IF it's "good enough" for locking hull planking together.
|Nov 13, 2012, 07:59 PM|
Thunder Bay Ontario Canada
Joined Jul 2007
As far as a 2 part WBPU see if anyone in your area is carrying products by Saman.. They make water based stains and polyurethanes. Their "Extreme" is a 2 part WBPU that is rated for hardwood floors etc. I have used it on solid hardwood stair treads and it has been holding up well for over a year now in a house with 2 Wheaton Terrrier dogs that go about 40-60 lbs each.
I believe you will find the price to be quite reasonable as well.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Entropy Resins Super SAP INF as alternative to Araldite LC3600||razortoe||Composites Fabrication||0||May 21, 2012 10:14 AM|
|Discussion||alternatives to resin for fiberglassing plywood hull?||JayJay76||Dock Talk||12||Dec 07, 2010 01:53 AM|
|Discussion||Alternate resins with elastic properties||C4X||Composites Fabrication||5||Jul 14, 2009 10:13 AM|
|Epoxy resin alternative?||TheX||The Builders Workshop||4||Feb 17, 2006 01:39 PM|
|Question||Glassing resin alternatives||PLD||The Builders Workshop||31||Jan 18, 2006 10:45 AM|