Originally Posted by flazo

http://www.valuehobby.com/airplanes/...ver-ready.html

this is the jet you are flying?
nice video thanks

fred

That's it - bananahobby now has it in stock as well.

Finally had time to get a quick video up of my P3 F-16. Please excuse the cameraman, I took this video with my iPhone fixed to my hat. Here are the power system specs after about 20sec into a static run up. The Don dopplered it at 120mph.

46amps, 805watts, 17.7v
36oz thrust, AUW 29oz

CS-70mm 10 blade fan
61mm thrust tube 95% FSA
Turnigy L2855-2100kv motor
Hobbywing FlyFun 60amp esc
Zippy FlightMax 5s 1800mah 40c batt

Phase 3 EF-16 CS-70mm 10 blade (0 min 29 sec)

Originally Posted by AirChime

I installed the CS10 in a Freewing F16 and love it!!! Video here with stock comparison:

http://www.youtube.com/watch?v=HfRQT...ature=youtu.be

Below are the components I added to handle the upgrade:

10 Blade High-Performance 70mm EDF Ducted Fan Unit
http://www.hobbyking.com/hobbyking/s...dProduct=22069

TURNIGY Plush 80A w/ UBEC Speed Controller
http://www.hobbyking.com/hobbyking/s...idProduct=3727

Turnigy L2855-2800 EDF Outrunner (630w)
http://www.hobbyking.com/hobbyking/s...dProduct=18543

Turnigy nano-tech 2250mah 4S 65~130C Lipo Pack
http://www.hobbyking.com/hobbyking/s...dProduct=19124

Turnigy 5A (8-26v) SBEC for Lipo
http://www.hobbyking.com/hobbyking/s...dProduct=10312

impressive! how many watts w/ the h/k motor?

chuck.

Originally Posted by dpowellmeii

Finally had time to get a quick video up of my P3 F-16. Please excuse the cameraman, I took this video with my iPhone fixed to my hat. Here are the power system specs after about 20sec into a static run up. The Don dopplered it at 120mph.

46amps, 805watts, 17.7v
36oz thrust, AUW 29oz

CS-70mm 10 blade fan
61mm thrust tube 95% FSA
Turnigy L2855-2100kv motor
Hobbywing FlyFun 60amp esc
Zippy FlightMax 5s 1800mah 40c batt

http://www.youtube.com/watch?v=l4yZArDqFQk&sns=em

The P3 F16 is really hauling butt on 800 watts and it sounds cool. Very impressive.

The F16 airframe has always been fast on low power, my original 800w one was clocked with a gun at 138 on a warm day years ago, and with the CS fan its not far off the old wemo setup. Best bang for the buck airframe.

Originally Posted by chas650r

impressive! how many watts w/ the h/k motor?

chuck.

Sorry, but I didn't even think to look at watts when I had the meter hooked up as I was concerned with voltage drop and amps. I'll try and take another look and post.

that would be great, the motor/fan info page says 64 amps w/ a 4000/4's . my battery will be closer to your size , so i am curious.

thanks , chuck.

Originally Posted by dpowellmeii

Finally had time to get a quick video up of my P3 F-16. Please excuse the cameraman, I took this video with my iPhone fixed to my hat. Here are the power system specs after about 20sec into a static run up. The Don dopplered it at 120mph.

46amps, 805watts, 17.7v
36oz thrust, AUW 29oz

CS-70mm 10 blade fan
61mm thrust tube 95% FSA
Turnigy L2855-2100kv motor
Hobbywing FlyFun 60amp esc
Zippy FlightMax 5s 1800mah 40c batt

http://www.youtube.com/watch?v=l4yZArDqFQk&sns=em

Awesome video....what iPhone do you have to take a video so clear. You must have a good app?

Did anyone hear about CS70mm 12 blades EDF?

Ming Lou

Originally Posted by Ming

Did anyone hear about CS70mm 12 blades EDF?

Ming Lou

10 is enough.....

But let's hear it anyway.....

Originally Posted by Ming

Did anyone hear about CS70mm 12 blades EDF?

Ming Lou

Not really but could we here more on the 18blade smart fan edf? It seams to get low thrust numbers with high amp draws. Do you have any recommendations on this topic?

I think 9 to 11 blades is the sweet spot. 12 blades performs well but the blade hubs get small (if individual blades) so the materials get real critical (cs12) 10 blades seems to allow a single piece rotor which is ideal for volume and quite robust. If someone wre on the ball...they would have just scaled the 70mm 10 blade to 90, 100, 120, as soon as they tealised the performance was decent and sound good. Scaling does not alesys work though

Sweet spot for high blade count fans that is.

dp nice vid 800 watts for 46 amps ..that a sweet set up right there.

CS is coming out 70/12 soon. Performance unknown, will it be another CS90/18? We shall see.