Paul,

Little question, I'm wanting to upgrade motors on my octo FCP to D3536 motors (now running D2836), but they don't fit the standard mount

Will the FCP Big Motormount fit these motors, and maybe have more room for the clip that retains the propshaft?

Hi Guys

It's me again.. Just promoting the Official Flyduino page at Facebook again.

Please go and hit the like button. You can ask your questions there if you want, don't hesitate! I'll try to answer all off your questions.

Jesse

Now I must go to Paul and his praise flyduino.net Store.

Since one was broken by the FC boards, it was replaced by Paul without hesitation and even shipped the same day, so I've already received it after 2 days. That's what I call a service.

Thank you Paul.

Hm,

sorry for beeing the pain in the butt, but I can't kick out this cutie out of my head:



I would be thrilled to hear some news about it :-D

Hi,

My flyduino board has problem, the molex interface port for gps port was dropped off it self after its fall down from table. The soldering pad was peeled off from the pcb. I planned to change the GPS serial port (serial 2) to serial 3.
can someone help me to point the right pin in the code in arduino IDE?

Thanks,

John

Anyone can help?

Originally Posted by Flyrobot

Anyone can help?

Serial 3 should be available!?
In the config.h look for "#define GPS_SERIAL" and change that line to

#define GPS_SERIAL 3

where "3" represents the serial port you want to use for GPS.

Hi guys,

I want to thank all the people who shared their info on this forum and all the people who are willing to help others. All this info helped me to create my first multi without much problems. For those who are interested, i share a little movie of my first flight.

quad (2 min 36 sec)

There is however one thing i need help with. I have a divide et empera board rev2 and there is a lipo alarm led onboard and its working fine but when i connect the lipo alarm extra connector to my ledstrip it does not work. The onboard led is flashing but ledstrip keeps blank. When i connect it to the status connector the ledstrip lights up similar to onboard led.
Do i need to make changes to the sketch or am i missing something else?
Thank you in advance

Originally Posted by zerosight

Hm,

sorry for beeing the pain in the butt, but I can't kick out this cutie out of my head:



I would be thrilled to hear some news about it :-D

Hi zerosight,

well, it took some time (for shure), but they are near! So, a little more patience is needed.
Paul will announce them when they are on stock.

aBUGSworstnightmare

Thx 4 the Info and sorry for my impatience :-)

Originally Posted by axelnied

Serial 3 should be available!?
In the config.h look for "#define GPS_SERIAL" and change that line to

#define GPS_SERIAL 3

where "3" represents the serial port you want to use for GPS.

Yes i did it. But it doesn't work. any other suggestion?
Thank.

John

Originally Posted by kinetix

Hi guys,

I want to thank all the people who shared their info on this forum and all the people who are willing to help others. All this info helped me to create my first multi without much problems. For those who are interested, i share a little movie of my first flight.
http://www.youtube.com/watch?v=iqLap3ASmsU
There is however one thing i need help with. I have a divide et empera board rev2 and there is a lipo alarm led onboard and its working fine but when i connect the lipo alarm extra connector to my ledstrip it does not work. The onboard led is flashing but ledstrip keeps blank. When i connect it to the status connector the ledstrip lights up similar to onboard led.
Do i need to make changes to the sketch or am i missing something else?
Thank you in advance

Hi kinetix,

Its nice looking frame. I plan to make my own design frame and want to buy hobbiest class, reliable, and easy to get sparepart CNC machine. Also it can cut carbon fiber. Can you suggest what brand and type and what software?

Thanks,

John

Originally Posted by Flyrobot

Hi kinetix,

Its nice looking frame. I plan to make my own design frame and want to buy hobbiest class, reliable, and easy to get sparepart CNC machine. Also it can cut carbon fiber. Can you suggest what brand and type and what software?

Thanks,

John

Hi John,

Thanx. I'm not sure i can help you though. Last winter i got unemployed for a few months and i got bored. Except for a nitro car 15 years ago i never did anything with RC before, but i am a video enthousiast. After seeing a few cool movies at vimeo i decided i want make my own airial footage. At first i wanted to buy a foam plane, but the plan shifted to a multicopter. I watched a lot of quad movies but i didn't like the one-arm-per-motor look. Then i found a movie by warthox and i liked this frame very much. So i took a good look and tried to recreate that frame. It worked out pretty well.
I used google sketchup to draw the parts. Printed them 1:1 scale to A4 sticker paper and pasted it onto a plate of carbon. Then i drilled all the holes and used a fretsaw and a jigsaw to create all the parts. I would have loved a CNC machine, but i had to do without. At close-up it isn't as nice as it could be, but i am pleased with the result.
I'm sorry i can't be of any more use. (-;
Good luck with your design.

Greetz

Just wanted to show my new flyduino cheeseplate quadcopter

The flyduino kit went together nicely without a problem just like my warthox set i had previously, the onboard power distro is the thing I love most about the flyduino frames so it was nice to see it carried onto the cheeseplate. Overall i am very impressed with it and its the cleanest build I have done, i really took my time in hiding as many wires as possible!!

All I need now is a nice canopy!
Hope you like

specs:
Flyduino Cheeseplate set with 25mm CF booms
NTM 28-30 Motors 750kv with 10x5 Graupner props
SimonK flashed 30A esc's
3s 2650mAh battery
Naze32 running multiwii32 port

Looks terrific!!!