HobbyKing.com New Products Flash Sale
Closed Thread
Thread Tools
This thread is privately moderated by nautique, who may elect to delete unwanted replies.
Old Sep 11, 2013, 04:36 PM
Registered User
nautique's Avatar
United States, CA, Roseville
Joined Feb 2011
539 Posts
Trader Rating: 73
Sold
Complete Multiplex Twinstar, FPV/AP Plane Completely Ready To Go . Shipped or LPU

Complete Multiplex Twinstar, FPV/AP Plane Completely Ready To Go . Shipped to CONUS or LPU.

I built this a few months ago and have maybe four flights on it, never crashed or even belly landed. In near perfect condition with some really cool modifications. Very clean build with reinforced surface control hardware and great attention to detail.
It has oversized front landing gear that supports the addition of a GoPro camera for AP. Also added was a steerable tail wheel that works really well. The additions were cleanly installed and allow for AP with no obstruction. The placement of the GoPro promotes the CG well and produces as little drag as possible. My intent was to add a brushless gimbal for smoother video but I just never got around to it.
Getting at least 12 to 15 minutes flight time on the supplied 5000mah lipo. Had voltage to spare after each flight but never really pushed it too far to ascertain exact flight maximum time.

Has installed 5.8 FPV gear including an NTSC 520 line camera and Immersion 600mw 5.8ghz VTX. Sorry, the plane is available for sale without the FPV gear but will not sell the camera and/or VTX by themselves. The top deck has the camera installed but I left a large open space to be customized to preference by the buyer. Great all around plane that flies nicely. Plenty of power to loop and roll in FPV. GoPro in pics not included.

$250, or $425 with the FPV gear. LPU would be best of course but willing to ship via USPS for an additional $60, (Will supply tracking but insurance would be extra, please allow ample time to properly box). Parts list below:

Airframe: Multiplex Twinstar II
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LA1353
Motors: Turnigy Park 450, 890kv
http://www.hobbyking.com/hobbyking/s...ner_890kv.html
Props: APC 6X4e
http://www.horizonhobby.com/products...x-4e-APC06040E
ESC's: Turnigy Plush 40amp
http://www.hobbyking.com/hobbyking/s...ontroller.html
Servos: Hitec HS82 MG
Flight Rx: Spektrum AR7000 6ch Rx
http://www.horizonhobby.com/products...iver-SPMAR7010
Stabilizer: Orange RX3S 3 Axis Flight Stabilizer, (still needs fine tuning)
http://www.hobbyking.com/hobbyking/s...elta_AUX_.html
Flight Lipo: qty 1 Turnigy Nano-Tech, 5000mah, 3s, 45c, (not perfect condition at all but still has life, price adjusted accordingly)
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
FPV Lipo: qty 4 Turnigy Nano-Tech, 370mah 3s
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
FPV Camera: RMRC 520 line, NTSC
http://www.readymaderc.com/store/ind...roducts_id=207
FPV VTX: Immersion 600mw 5.8
http://www.readymaderc.com/store/ind...roducts_id=266
nautique is online now Find More Posts by nautique
Last edited by nautique; Sep 13, 2013 at 12:04 PM.
Sign up now
to remove ads between posts
Old Sep 11, 2013, 05:19 PM
Registered User
nautique's Avatar
United States, CA, Roseville
Joined Feb 2011
539 Posts
Trader Rating: 73
Links should be fixed now, sorry bout' that...
nautique is online now Find More Posts by nautique
Last edited by nautique; Sep 11, 2013 at 06:38 PM.
Old Sep 11, 2013, 05:28 PM
Registered R/C Addict
United States, TX, San Antonio
Joined Jun 2012
111 Posts
Trader Rating: 6
Would you happen to be considering selling a 5.8ghz receiver for a GS along with it as well? Or maybe have a nice 5.8 antenna I can patch onto my FatSharks?
scienc is offline Find More Posts by scienc
Old Sep 11, 2013, 06:37 PM
Registered User
nautique's Avatar
United States, CA, Roseville
Joined Feb 2011
539 Posts
Trader Rating: 73
I don't have an external video Rx to include but the Immersion 600mw VTX is already compatible with Fatshark goggle systems.
nautique is online now Find More Posts by nautique
Old Sep 11, 2013, 10:03 PM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
Sweet build. Very clean. Good luck with the sale.
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Latest blog entry: Durafly Das Ugly Stik Review
Old Sep 12, 2013, 02:38 AM
Registered User
nautique's Avatar
United States, CA, Roseville
Joined Feb 2011
539 Posts
Trader Rating: 73
Thank you jjmelo...
nautique is online now Find More Posts by nautique
Old Sep 13, 2013, 01:17 PM
Plane Destroyer / Life Enjoyer
airbagit13's Avatar
Miami, FL
Joined May 2009
3,508 Posts
Trader Rating: 58
Nice landing gear mod!
airbagit13 is offline Find More Posts by airbagit13
Old Sep 13, 2013, 01:28 PM
Registered User
nautique's Avatar
United States, CA, Roseville
Joined Feb 2011
539 Posts
Trader Rating: 73
Thank you, actually works really well. As mentioned I had planned to add a brushless gimbal if kept it. I think it would work awesome. Plenty of power and wing surface to carry it.
nautique is online now Find More Posts by nautique
Closed Thread

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold FPV system ready to go! GoPro cable included. For sale or trade. Bmx2996 Aircraft - General - Miscellaneous (FS/W) 1 Jun 14, 2013 10:55 AM
For Sale RTF Multiplex Twinstar w/PowerPack, FPV system and more - Video... wac FPV Equipment (FS/W) 3 Mar 24, 2013 06:56 PM
For Sale Complete FPV Twinstar II & GS Setup, ready to fly. Jonno271 FPV Equipment (FS/W) 10 Mar 06, 2012 05:27 PM
Sold LPU Northwest Mo or San Antonio, Tx. Skywalker fpv plane fully set up and ready to go randall1959 FPV Equipment (FS/W) 2 Jan 14, 2012 09:29 AM
Gallery Multiplex TwinStar 2 ready for test flight Patrick Plawner Your Plane Photos 0 Aug 05, 2005 08:21 AM