Joined Jan 2005
3.2 gm Micro Airplane / Flies great!!
After a lot of trial and error I have come up with a Super Micro Airplane
that flies great Indoors or outdoors (with near calm wind).
I took it over to local flying field today for tests in larger area than
my small back yard. It flies very good with flight time in 4 to 5 min
range. Here are the details:
Wing: Span 6", Cord 1.5" Made from 0.5 mm CF rod, 1 mm Depron ribs,
saran wrap covering
Horz Stab: 2.25" x 0.7" Made from 0.5 mm CF rod & 0.67 mm Depron
Vert Stab: 0.7" wide x 1" high Made from 0.67 mm Depron
Rudder: 0.4" wide x 0.9" high Made from 0.67 mm Depron
Fuselage: 4.5" long Made from 0.5 mm CF rod
Motor: 4 x 11 mm, 13 ohm coreless
Propeller: Plantraco 32 mm
1. Plantraco Butterfly 2Ch, 0.38 gm Actuator Receiver for those who have
Plantraco 900 mhz transmitter
2. Deltang RX43 4 ch, 0.35 gm Actuator Receiver for those who have
DSM2 Spektrum or JR transmitters.
Actuator: Plantraco Nano Actuator 0.07 gm
If there is a lot of interest let me know and I will try and get a video made!
Parts Available from the following sources:
BSDMicroRC.com, Plantraco.com, Micronradiocontrol.com
Battery: Full River 1S/20mah
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Found||Aluminum 30mm spinner with collet for 3.17 shaft or GM 4.75x4.75 Pylon set 3.2 shaft||josephcharles||Aircraft - Sailplanes (FS/W)||1||Jun 05, 2011 06:37 PM|
|Sold||PICO SLICK 3D/Aerobatic (Receiver Ready) Airplane 21.3 gm||scharlach||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||4||Jan 24, 2011 10:30 PM|
|Sold||KOLIBRI RTF Micro Airplane 3 CH, 5.44 gm||scharlach||Aircraft - Electric - Micro & Indoor Airplanes (FS/W)||3||Dec 24, 2010 10:51 AM|
|Discussion||What motor/gear/prop for 2.5 to 3 gm airplane?||scharlach||Scratchbuilt Indoor and Micro Models||4||Jul 28, 2008 02:55 AM|
|Discussion||Any quality 3 to 4 gm micro servos out there?||snopro_440||Radios||1||May 06, 2008 02:03 AM|