|Dec 01, 2007, 05:44 PM|
33% is good advice.
Keep in mind also that the center of pressure (lift) usually moves ahead (in the direction of travel) with increased angle of attack of the wing(s).
|Dec 02, 2007, 05:43 PM|
Joined Dec 2005
With a lot of planes you can start by balancing at
the main spar. That will get you close enough to fly it.
The go inverted , to test. Most perfer bal with a little
down to fly level, while inverted. Although balance
point preference may vary from pilot to pilot. To much down elevator
your nose heavy , no down you might be tail heavy. But some
like a neutral GC, level inverted flight with no elevator input
|Dec 02, 2007, 11:45 PM|
Thanks for the replies. I generally would start with balance at the main spar but this plane has a balsa covered foam core wing so there is no main spar. It balanced close to the 33% area so I took it up this afternoon for a short flight and it seems ok but it was a little windy and getting late so I'll fine tune it later. I just installed a new OS 91 so in the process of breaking it in.
|Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale Joss Stick YS120 JR 622 - Used||StrayDog||Aircraft - Fuel - Airplanes (FS/W)||0||Mar 17, 2006 11:17 AM|
|FS: Model Tech JOSS STICK ARC w/ YS 120SF||StrayDog||Aircraft - Fuel - Airplanes (FS/W)||1||Oct 30, 2004 09:21 PM|