|Jun 29, 2002, 08:35 PM|
TX and RX Crystals the same?
I bought some crystals today and i asked for a crystal for my RX and a Crystal for my TX when i got home i noticed that bothe say RX crystal did he just give me a wrong Crystal or can they be used in either?
|Jun 29, 2002, 10:52 PM|
Santa Paula, Ca
Joined Apr 2001
Well yes both crystals are the same, much as 18 wheelers are the same as volvos. They are made of the same basic components, but each has some differences. The Tx crystal will be cut and trimmed for a frequency which is the channel frequency. Sometimes the crystal is one third or one sixth the channel frequency, but each transmitter manufacturer does things a little differently. The receive crystal is cut and trimmed for a frequency slightly off of the channel frequency. This allow two signals to mix in the receiver, one is the received signal from the transmitter, the other is the receive crystal frequency. The difference is a frequency which is filtered and amplified in the receiver eventually detected and turned into the control data for the servos.
You cannot directly exchange the two types of crystals. In the United States the FCC rules forbid users changing the transmitter frequency. You must return the radio to the manufacturer for the new crystal and they also align the transmitter to FCC specifications. Call Hitec and ask about the charges, it's not too much if I remember properly. The store sold you two receive crystals because they will not have transmit crystals and the sales person must not know the difference.
Good luck and Happy flying!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Why don't TX and RX crystals match?||Aslander||Radios||2||Sep 14, 2003 11:42 PM|
|WTB: MPX Ch 22 TX and RX Crystals||96S14||Aircraft - Electric - Airplanes (FS/W)||0||Dec 18, 2002 06:34 PM|
|Question||tx-rx crystals in multibles?||rcspud||Radios||2||Dec 04, 2002 12:38 AM|
|Stupid question about tx/rx crystals||RandyK1||Radios||27||Nov 16, 2002 06:01 PM|