Originally Posted by Jonathan Bradbury

I was refering to delivery times.

Dont know about the Turnigy, I'll refer you to the batteries and chargers forum for that one. The flyers are pretty clued up on such things,.

Dont apologise for''noob questions'', the one thing that is certain in life is that everyone starts with bugger all knowledge.

oh right hahaha,
this is the turnigy - http://www.ebay.co.uk/itm/Turnigy-Ac...ht_3437wt_1037

or there is the Imax B6AC - http://www.ebay.co.uk/itm/HIGH-QUALI...ht_5477wt_1043

and okie dokie pal iv seen on this forum that if the imax b6 doesnt have the ''Sky Rc'' logo sticker on it its not real?

like the one iv found doesnt have it on?

http://www.ebay.co.uk/itm/2609820191...ht_8393wt_1066
and yup thats true

Originally Posted by Rellik

so this shaft http://www.atomik-rc.com/Pinned-Lays...category=76910 goes with the new sprocket set up? are the sprockets up for sale yet?

Here is the new layshaft, part 0527 that is needed to use the Alleven Microdrive:

http://www.atomik-rc.com/Pinned-Layshaft-VMX-450.html

Kurtis: I've been using the ProPeak-branded version of that Imax B6AC for a couple of months now, and it has been working well so far. It's a great charger for the price.

Oh, and definitely don't go charging your batts at 15A if you want them to last.

so the new front spocket that come with that set has the sxlot for the pin, and i just get the saft and im good to go? is this sprocket set avalible yet?

Originally Posted by Guidoracer

Kurtis: I've been using the ProPeak-branded version of that Imax B6AC for a couple of months now, and it has been working well so far. It's a great charger for the price.

Oh, and definitely don't go charging your batts at 15A if you want them to last.

ok cheers and the Pro-Peak one whats the price for that one?
i really havnt made my mind up on which one to get yet haha

Originally Posted by Kurtis

ok cheers and the Pro-Peak one whats the price for that one?
i really havnt made my mind up on which one to get yet haha

I have the ProPeak Sigma II, and it looks to be about 57 GBP, maybe because of the brand. Same layout, same screens, same ports on both sides.

Originally Posted by Rellik

so the new front spocket that come with that set has the sxlot for the pin, and i just get the saft and im good to go? is this sprocket set avalible yet?

Yes, the front sprocket in the Microdrive set is made for the slotted layshaft. It cannot be used with the set-screw one.

It's available now at 2Wheelhobbies.com for $43.99, and comes with a gold, silver, or red rear sprocket. 2Wheelhobbies also has the pinned layshaft in stock ($4.79).

Originally Posted by Guidoracer

I have the ProPeak Sigma II, and it looks to be about 57 GBP, maybe because of the brand. Same layout, same screens, same ports on both sides.

ah right, iv got a bit of a budget for the charger £40 not good

The Alleven RC micro-drive sets and the pinned layshaft are on the website.

http://2wheelhobbies.com/advanced_se...50+Micro-Drive

http://2wheelhobbies.com/product_inf...oducts_id=1618

The layshaft will be in stock in a couple days.

Bruce

Hey guys

I've just become interested in the Venom VMX. However, I see that it has been discontinued by Venom. There are still lots of units NIB for sale on evil bay. What I am wondering is whether I If I were to purchase one would replacement parts be an issue. Just looking for some feedback from those in the know.
Thanks

Originally Posted by CPTGUY

Hey guys

I've just become interested in the Venom VMX. However, I see that it has been discontinued by Venom. There are still lots of units NIB for sale on evil bay. What I am wondering is whether I If I were to purchase one would replacement parts be an issue. Just looking for some feedback from those in the know.
Thanks

Hi there, it may be discontinued but how ever i do not know the reasonthat could is because they are bringing out the new brian deegan MM450 with the new E-gyro,

and yes parts are still available for the vmx 450,
http://www.venom-group.com/Store/VMX-450-RTR-Dirtbike
http://2wheelhobbies.com/index.php?cPath=22_73

and soon the E-gyro will be out to put straight into the vmx 450.

Great Kurtis Thanks for the info

The parts are still supported, same as MM450, just added the E-Gyro. The mechanical version is disc.

Originally Posted by Kurtis

Hi chris,
I just want to give you a big Thanks, to you and the venom team for getting my items that I ordered off the venom site to my house promptly!
Thanks!
I cannot wait to get my VMX!

No worries, your welcome!

Originally Posted by Chris Nicastro

Hey JB,
You can easily take a few VMX450's out on a concrete warehouse floor and flat track them. I've been running the VMX with the E-Gyro in our warehouse at full speed and its awesome! You even get wheelies while leaned over crossed up!

Hi Chris.

Options will be looked at, as things are fairly sparse around here. (All church hall 1/10 touring cars around here and they don't have one single flicker of interest in bikes). With this many old RAF bases around me (in the heart of WW2 bomber country), you'd think there would be stacks of on road and off road tracks. The reverse is the reality