|Feb 26, 2013, 04:29 PM|
WINDBURNER Pilot's Thread
WINDBURNER Pilot’s Thread
Set ups, servo’s, flying weights, sites, suggestions and more
This thread is for Windburner owners to share their experiences: anything and everything Windburner related.
I wanted a fast plank which was easy to build and just as fun and easy to fly for dynamic soaring. It started off as a 40” plane with a lost foam fuselage. From the very first Windburner I realised I had something special. So I made a plug for a fuse and increased the wing size to 48”. The wing was made from a plastic laminate material which is a skinny laminate of 0.5 mm. It flew so well that it broke the 48” tailless world record. So then I decided to make a hollow moulded wing version. From then on, the Windburner has gone from strength to strength. I’ve refined it to make it faster and faster over time and so far it has broken not only the 48” world record but holds the outright world record for a tailless aircraft. A special thanks to Tim and Ezza: without their input the Windburner wouldn’t be what it is today: thanks.
20 December 2010: New 48” tailless world record flown by Ezza at 188mph at Dungog, NSW
22 February 2011: 48” tailless world record flown by Ezza at 195mph at the Lighthouse, Byron Bay, NSW
5 March 2011: 48” tailless world record flown by Ezza at 229mph at the Lighthouse, Byron Bay, NSW
30 May 2011: Outright tailless world record flown by Joel Peddler at 260mph at Weldon, USA
4 April 2012: Outright tailless world record flown by Jared Roberts at 265mph at Weldon, USA
26 April 2012: Outright tailless world record flown by Chris Bosley at 267 mph at Weldon, USA
18 May 2012: Outright tailless world record flown by Alex Hewson at 269 mph at Wainui, New Zealand
22 May 2012: Outright tailless world record. Flown by Bruce Tebo at 285 mph at Weldon, USA
14 December 2012: Outright tailless equals world record. Flown by Alex Hewson at 285 mph at Tekapo, New Zealand
16 April 2013 Outright tailless world record. Flown by Spencer at 297 mph at Weldon, USA
First wing over 300mph!!!
29 April 2013 Outright tailless world record. Flown by Alex Hewson at 306mph at Tekapo, New Zealand.
8th Feb 2014 Outright tailless world record. Flown by Bruce Tebo at 331mph at Weldon, USA
11th May 2014 Outright tailless world record.Flown by Bruce Tebo at 341mph at Weldon, USA.
The fastest recorded speed for the Windburner in Australia at the moment is Leo Yu at 250 mph on 26 May 2012 at Dungog, NSW.
The Windburner today has evolved into a CNCed wing with the original Windburner air foils cleaned up by Peter Wick: thanks Peter. It now has a foiled tail and I call it the Windburner Mark III.
This thread is for the pilots to put on their build threads for any and all information for other Windburner pilots: welcome!
|Feb 26, 2013, 04:45 PM|
My 269 was at Wainui, NZ. Weight: 2.3kg, MKS 6125minis, 4.8v eneloop 2000mah, AR7000 DSM2 RX
285 was with a NZ made replacement fuse, original repaired wing after a 250mph crash. No ballast, weight 1.7kg, same radio gear.
My new Burner Mk3 is still un-flown... waiting for that BIG day...
|Feb 26, 2013, 04:54 PM|
Noteworthy points on weight from my experiences...
My heavy Burner at 2.3 kg took a while to wind up, like a kinetic, but held speed better while waiting for a gust. Took a bit to accelerate due to weight...
My repaired burner at 1.7kg, did 285... It really picked up speed quick, but also lost it again when wind speed decreased. This may be the way to go if you fly in a place that gets short period gusts. Asto's heavy burner on the same day at about 2.2kg, only managed 241mph. It seemed too heavy and never really accelerated. It stayed between 220 and 240 for most of the flight.
A heavy burner needs to be flown in large, smooth, consistent rad orbits to enable best section efficiency throughout the lap, the lighter burners have no problems banging a sharp turn.
Most of all, the heavier they are, the harder they are to land. Keep that in mind.
Overall, I LOVE the Burners!
|Feb 26, 2013, 05:33 PM|
Great thread Kevin. It has been really fun to watch and be involved. The Windburner really pushed the speeds up for planks. A huge success, congrats Kevin!
Wow Alex, your 285mph Windburner was only 1.7kgs! I have to agree completely with everything you said. A lighter burner can really bang off the shear and accelerate. My heaviest burner was 2.4kgs and it loved a round circuit with gentle elevator input. I have a new heavy one to build but I think I might keep it lighter maybe 1.7 to 2kgs.
One of my favorites, I love flying my Windburner when conditions are good for ds'ing.
|Feb 26, 2013, 05:41 PM|
The other local Burner Pilot loved his burner. Only a light glass at 1.3kg, but survived so many crashes and enjoyed a lot of airtime. Pushed his PB up almost every time he flew it! It had MKS6125s minis and 4.8v Eneloop 2000.
I did 225 with it at 1.3kg early in the day before i went 269 with my heavy.
|Feb 26, 2013, 08:35 PM|
Cool thread Kevin. I have a couple of Mk II 'Burners on the bench ready for gear. Will post some pics when they're done.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Windburner||Kevin Bennett||Aircraft - Sailplanes (FS/W)||1||Jan 29, 2013 08:45 PM|
|Discussion||One more "What's this sailplane thread"||jolly01||Thermal||7||Jan 26, 2013 04:06 PM|
|Complaint||nvm||markymarkz||Site Suggestions / Complaints||2||Jan 06, 2013 08:28 PM|
|Cool||Whose Piloting Your GWS Plane? - A thread just for the little plastic pilots!||Michnet76||GWS (Grand Wing Servo)||7||Feb 23, 2005 10:55 PM|