|Jan 03, 2015, 05:25 PM|
United Kingdom, England, Surrey
Joined Nov 2012
Eagle Routing Sizes and 3x6 Header Pins
I have two problems which I'm hoping you cleaver people will able to help me with.
First what should the routing (thread) size be in eagle for a power distribution board with a 3/4s attached?
Second is there a 3x6 header pin in the eagle library or a downloadable one because i can't find one.
|Jan 04, 2015, 07:19 AM|
1. If you're dealing with a lot of current, make the traces as big as possible. You can use the Draw function to create large rectangle areas where the copper is not removed, making them even larger.
2. Use three 1 x 6's instead. If the grid is set properly, they will snap into position and the board will be the same as if you used a single 3 x 6.
|Jan 05, 2015, 03:23 AM|
United States, ID
Joined Sep 2011
You can save yourself a lot of time and frustration by using the SparkFun Eagle library and rules/settings.
There's a lot of settings you'll probably never find, so just get the DRC rules file from sparkfun.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||3 x 40 pin Break Away Headers - Right Angle||fm_head||Aircraft - Electric - Multirotor (FS/W)||0||Nov 09, 2014 09:15 AM|
|Wanted||3x** Right Angle Pin Headers||punkindrublik||Aircraft - Electric - Multirotor (FS/W)||3||Sep 25, 2014 07:28 PM|
|Help!||Where can I find M-F 3 way 90 degree header pins?||geekness||DIY Electronics||6||Nov 17, 2013 06:30 PM|
|Found||8x3 pin headers for TBS disco||bigddybn||Aircraft - Electric - Multirotor (FS/W)||8||Nov 10, 2013 09:44 AM|
|Question||AR500 end pin modding (group purchase header pins)||Kbofwy||Radios||0||Feb 05, 2009 03:10 PM|