Originally Posted by QDRevenger

Im resisting the urge to go more cells. Ill have few more flights, ordered a data logger, so i can see whats going on. If it fries, it fries, no biggie. New projects becon

QDRevenger.

Do not resist. Give in to your urges. In the end you will be assimilated!

sd36 zoom (0 min 6 sec)

6 seconds of video from my mates phone , my Sd36 is really hammering , I love it

Originally Posted by mrgriz

http://youtu.be/jNSWxMqs9jQ

6 seconds of video from my mates phone , my Sd36 is really hammering , I love it

What is his setup?

My maiden yesterday:

H9 Sundowner 36 6S electric (2 min 52 sec)

Nice Maiden! You didn't list what prop you were using for the flight or the all up weight of your plane. Have you measured the WOT watts yet?

McD

Nice Maiden! You didn't list what prop you were using for the flight or the all up weight of your plane. Have you measured the WOT watts yet?



McD

Thanks!
Prop 10 x10 APC
Weight 1450 grams without the battery
Battery 460 grams
WOT 1500 watts

Over 400 Watts/Lb, no wonder it moves out!

McD

Originally Posted by guyst

What is his setup?

turnigy c4260-600kv , 6s 5000 pack and
13x8 prop

heaps of torque and heaps of fun

I know it wouldn't be legal for EF-1 racing, but would a 4S 3300 mah at 352 grams be too heavy for the power 25 setup or would the SD handle the extra weight ok?

Originally Posted by mrgriz

turnigy c4260-600kv , 6s 5000 pack and
13x8 prop

heaps of torque and heaps of fun

Wow, 5000 pack fit inside? Isn't that too heavy?
I got c4250 800 kv with 10x10 prop, I might try 11x10 or 12x8 for the extra speed... need to check the amper draw.. Im using a 80 A ESC.
Im also trying to keep it light, that is why im using a 6s 3000 pack.
Any modifications to the wings? People crashed this model when going into high manuvers...

Originally Posted by guyst

Wow, 5000 pack fit inside? Isn't that too heavy?
I got c4250 800 kv with 10x10 prop, I might try 11x10 or 12x8 for the extra speed... need to check the amper draw.. Im using a 80 A ESC.
Im also trying to keep it light, that is why im using a 6s 3000 pack.
Any modifications to the wings? People crashed this model when going into high manuvers...

no its not too heavy , plenty of room for the 6s 5000 pack , I haven't been able to break the wings off it yet

Is it legal to trim (clip) the wings down of the Sundowner 36 to fit the minimum wing area requirements for EF1?

The fuse is too bulky to be competitive EF1 racer... Get a shoestring or Proud Bird if you want to be competitive.

Originally Posted by Batmanwpg

Is it legal to trim (clip) the wings down of the Sundowner 36 to fit the minimum wing area requirements for EF1?

Purchase a Dara from Nitroplanes, they will ship to Canada via USPS [Priority International Mail], 35 bucks shipping. Also there are some very good quaility kits available

Haven't been too impressed with the build quality of the Shoestring or Proud Bird. Sundowner seems to be much better. Hows the quality of the Miss Dara?
Still need my question answered can I clip the wings?