I Converted my Double Horse 9100 into a 9116....4-Channel 2.4 G and you can fly it when there's a breeze. The 9100 didn't like any wind at all. Any Gust of wind would take it away.
My problem is I found the 9116 Transmitter for $9.00 bucks, but it didn't come with a manual. I don't no if there is something wrong with my radio, but I can't seem to set the sub trim. I can't get my up and down buttons to work. I can change Mode and reverse servos, but thats about it.
I was hoping someone can email a copy: dlld2112@gmail.com or tell me how to do it? Thank-You

Originally Posted by Donny2112

I Converted my Double Horse 9100 into a 9116....4-Channel 2.4 G and you can fly it when there's a breeze. The 9100 didn't like any wind at all. Any Gust of wind would take it away.
My problem is I found the 9116 Transmitter for $9.00 bucks, but it didn't come with a manual. I don't no if there is something wrong with my radio, but I can't seem to set the sub trim. I can't get my up and down buttons to work. I can change Mode and reverse servos, but thats about it.
I was hoping someone can email a copy: dlld2112@gmail.com or tell me how to do it? Thank-You

Here you are:
http://www.rcgroups.com/forums/showa...mentid=5091839

Tech infos here:
http://www.rcgroups.com/forums/showa...1&d=1340883143

Troubleshooting manual here:
www.rcgroups.com/forums/showthread.php?t=1750650

further tech questions here:
http://www.rcgroups.com/forums/showthread.php?t=1540154

have fun
-mike-

Iv been told the rudder trim on the 9116 Tx doesnt work and can only be trimmed in the sub trim menu. Is this true?

Originally Posted by GiantScale

Iv been told the rudder trim on the 9116 Tx doesnt work and can only be trimmed in the sub trim menu. Is this true?

??? not true.
the trim settings done with the buttons cannot be saved, though.
they always reset to neutral if you switch the TX off.
-mike-

You can get it at http://www.ujtoys.com/Default.asp