HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Apr 27, 2013, 08:14 PM
Flying a recreational vehicle!
Flying Pitcher's Avatar
Greenland, Qaasuitsup
Joined Apr 2013
1,901 Posts
111
Flying Pitcher is online now Find More Posts by Flying Pitcher
Last edited by Flying Pitcher; Oct 18, 2014 at 10:24 PM. Reason: after reading around...
Reply With Quote
Sign up now
to remove ads between posts
Old Apr 28, 2013, 01:00 AM
Intentionally left blank
Joined Aug 2005
925 Posts
Quote:
Originally Posted by Flying Pitcher View Post
Anyone ever tried that ?
Generally not, due to the forces placed on a prop, bending force and a tension force, and ensuring it is strong enough.
Usually the cost of a prop is significantly smaller than the cost of removing it from flesh.
Not to mention the unreasonable attitude some people display when injured.

Best to chuck even a slightly damaged prop (bent, nicks and chips) in the bin and get a new one. Also the vibration of an unbalanced prop is not good for motor and electronics.
Magrat is offline Find More Posts by Magrat
Reply With Quote
Old Apr 28, 2013, 09:21 AM
Registered User
Wilson, NC
Joined Aug 2009
224 Posts
Hi Flying Pitcher
A prop can be very dangerous. What you have done is very dangerous. Please stop that. You getting hurt will give our hobby a bad name. If you cannot afford to replace a damaged prop, stop flying.
villapilote is offline Find More Posts by villapilote
Reply With Quote
Old Apr 28, 2013, 01:49 PM
Flying a recreational vehicle!
Flying Pitcher's Avatar
Greenland, Qaasuitsup
Joined Apr 2013
1,901 Posts
111
Flying Pitcher is online now Find More Posts by Flying Pitcher
Last edited by Flying Pitcher; Oct 18, 2014 at 10:24 PM.
Reply With Quote
Old Apr 28, 2013, 02:36 PM
Flying a recreational vehicle!
Flying Pitcher's Avatar
Greenland, Qaasuitsup
Joined Apr 2013
1,901 Posts
111
Flying Pitcher is online now Find More Posts by Flying Pitcher
Last edited by Flying Pitcher; Oct 18, 2014 at 10:24 PM.
Reply With Quote
Old May 15, 2013, 01:43 PM
Addicted to lazy-flying models
azdiane's Avatar
United States, AZ, Chino Valley
Joined Apr 2013
122 Posts
Major no-no !

I remember a discussion about this subject at a flying club years ago, and one of the members showed off a scar. A "repaired" prop blade had separated under centripetal load and passed cleanly through his left ear. A couple of inches farther to the right and it could have killed him.

IMHO, particularly given how little props cost in the greater scheme of things, trying to repair a prop is one of the absolute no-no's of our hobby. It just isn't worth the risk. I beseech you to not do it!
azdiane is offline Find More Posts by azdiane
Reply With Quote
Old May 19, 2013, 12:33 AM
Lear,Gulfstream,Waco pilot
Hazlehurst GA
Joined Jan 2001
389 Posts
I cannot imagine trying to repair a prop for any model I have. A failure would endanger my arm/face/hand/fingers....considering the cost of ANY new prop available today, I'd say it is silly(false economy) to try to fix a prop....just get a new one( no flaws!)
Learn from us who have had a prop fail....it's not worth it.(don't ask how I know)
agpilot24 is offline Find More Posts by agpilot24
Reply With Quote
Old May 23, 2013, 10:17 AM
Storm Runner guy
Slider2732's Avatar
USA, OK, Muskogee
Joined Nov 2008
3,581 Posts
Hope you are back up and flying

Good advice above and safety is the rule.


However, reading of where you fly and that you seem to be a tinkerer with ideas, i'd always support that when the person has a bit of common sense !
Have you ever tried a single bladed prop ?
The basis is that you weight the other side, make everything secure and well finished. There can be no case of "it'll do", or the motor is likely to fail pretty quickly anyway.
It'll balance in the same way as a 2 bladed prop, stopping at different places each time it is spun around.
Also, a modification should never be tested while stood at the side of it, bit of forward thinking and expecting a dramatic failure is the right way to consider something like this.


If you go to 7:10 in this video, he shows a 1 bladed prop on an Extra 330

1 Bladed prop Extra 330 demo + T-580 QuadCopter Lighting Tips . (9 min 38 sec)
Slider2732 is offline Find More Posts by Slider2732
Reply With Quote
Old May 24, 2013, 09:20 PM
Do it Right, the first time!
CoolerByTheLake's Avatar
United States, MN, Hermantown
Joined Dec 2008
5,864 Posts
Considering the thread you started here: 3D Electric Heli Flying

Alert----- Newbie personal injury from main blades

and now this one, Anyone tried repairing a prop ? looks like your an acccident waiting to happen! You really need to adopt some safety standards and practices, before you do some bodily harm to yourself!!
CoolerByTheLake is offline Find More Posts by CoolerByTheLake
Reply With Quote
Old May 27, 2013, 08:49 AM
Registered User
hawl131's Avatar
United States, CO, Colorado Springs
Joined Mar 2013
186 Posts
Never re-use a broken prop, u could get a 11x7 2 blade APC prop, I come with spacers for the prop shaft, a 2 blade is more efficient anyways.
hawl131 is offline Find More Posts by hawl131
Reply With Quote
Old May 29, 2013, 01:30 PM
Redacted per NSA "suggestion"
dedStik's Avatar
United States, VA, Virginia Beach
Joined Feb 2012
5,477 Posts
Props are cheap, buy another.

10x7 from MAS http://masterairscrew.com/10x73-blad...propeller.aspx

http://www.europemodels.eu/p_3853_3+...lass%29+2+pcs/
dedStik is offline Find More Posts by dedStik
RCG Plus Member
Latest blog entry: More Confessions of a Smoker
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Has anyone tried a 9.6v or 12v battery with DC-DC converter to power RX & servos wellicu812 Batteries and Chargers 16 Apr 22, 2013 09:16 AM
Whoops! Anyone tried fixing hero 3 after crash? Brenno FPV Talk 0 Apr 21, 2013 06:18 AM
Discussion Anyone tried Foxtech D700 LCD with 5.8GHz built in? SamurAchzar FPV Talk 0 Apr 19, 2013 04:52 AM
Discussion Has Anyone ever tried these out? mrmki81 Radios 18 Apr 06, 2013 08:14 PM
Question Anyone tried JetFan90 with 1100kv motor? carl rich Electric Ducted Fan Jet Talk 16 Mar 28, 2013 10:42 PM