Can anyone tell me if this rotor will work with the stock brake set up? I know the steel rotor on Internet RC says it needs special pads to go along with it. Also is it a good improvement over stock brakes? Heres a link:

CNR Steel Rotor

It'll be a direct swap for the NF fibre or steel disc. Fits right with the existing caliper system no worries.

However on John Veals website it says: "aluminium discs from CNR seem to wear fairly quick, Deans disc is almost worn through!"

Maybe you should just go for the internet rc disc.

Ian

Yeah, those will work and it should come with the pads.

Lorenzo

Has the Internet RC Disc gotten a better review? Is it a noticable improvement over the stock fiber disc?

Originally Posted by lorenzo_MiniGP

Yeah, those will work and it should come with the pads.

Lorenzo

Lorenzo have yor tried CNR rotor? I don't know which one to get, CNR or Internet RC set up?

Edit: Is the Internet RC rotor worth the double price of the CNR rotor being the pads are extra on the Internet RC disc?

The rotors are the same, unfortunately they both wear. I have gone through 2 rotors since my first nitro bike and I run my bike very, very often. If you just run it every now and again then you should be fine. They are basically exactly the same..

The first rotor was from Internet-rc and the second from CNR and they both wear, but I don't think one lasted longer then the other?

Lorenzo

Originally Posted by lorenzo_MiniGP

The rotors are the same, unfortunately they both wear. I have gone through 2 rotors since my first nitro bike and I run my bike very, very often. If you just run it every now and again then you should be fine. They are basically exactly the same..

Lorenzo

Thanks. I will try the CNR rotor. Hopefully they will come with the pads cause I called CNR and can't get a hold of anyone to ask there.

If the CNR rotor comes with the pads let me know! I'll try them out too.

The description does not say whether they come with the pads or not, so I am unsure. Also there is no picture of the pads. And Dave is usually good about telling you exactly what you're paying for.

Ian

Originally Posted by grymg

If the CNR rotor comes with the pads let me know! I'll try them out too.

The description does not say whether they come with the pads or not, so I am unsure. Also there is no picture of the pads. And Dave is usually good about telling you exactly what you're paying for.

Ian

I ordered the rotor so I will PM ya when I get it to let you know what it comes with if anything. Also if you click on the description for the rotor there is a picture of it toward the middle of the page. Looks nice.