|Aug 20, 2013, 02:33 PM|
Joined Jul 2013
Wich ESC do i need?!
I have bought the HK Combat & Sloap Soaring Wing and a motor and all the other bits i need.
i have bought the Turnigy L2210-1230 and a plush 18Amp ESC.
i wanted to put a master airscrew 8,5x6 on this and fly it around at moderate speeds as im still learning and dont want to wreck one of only two flying models.
now to the battery. I have a 2200mah 3S and a 1300mah 2S. Wich of these will work with the 18Amp plush? I do have a 30Amp plush as well if that is needed.
will my motor handle that prop on 2S or do i need to put in the 3S and bigger ESC?
|Aug 20, 2013, 02:48 PM|
18a and 2s with that prop should be fine. I use a 15a and an 8x3 on 2s and the esc stays cool. 3s may cause it to get warm/hot so be careful.
|Aug 20, 2013, 05:25 PM|
Best bet Verrak, is to get yourself a watt meter. It saves all that guess work and burnt out items! Best £20 I've ever spent on RC gear.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Mini-HowTo||Battery of the TX died, need to replace, but for wich one??||joaomangolini||Batteries and Chargers||6||Aug 06, 2013 03:54 AM|
|Discussion||need help with choosing wich esc to match a simon k rc timer pls help||quadcopterguy||Multirotor Electronics||2||Jun 09, 2013 09:11 PM|
|Question||I need to know wich would i be better off doing when buying the PZextra300 BNF or PNP||skarface||Parkflyers||1||Sep 25, 2011 06:27 AM|
|Question||foamy glassing atemt ; wich R&G epoxy do i need?||cmulder||Composites Fabrication||18||Oct 13, 2009 07:48 AM|
|Discussion||Wich Li-po do I need||planedude||Electric Plane Talk||16||Jun 19, 2008 12:03 AM|