|Mar 20, 2012, 08:42 PM|
FMS 1400mm FW-190 Owners Thread
So here it is. The purpose of this thread is for owners to share and exchange experiences in a polite and constructive manner.
This is also to serve the purpose for new or aspiring owners of this plane to not have to wade through 40+ pages of bickering and what not to find any relevant information.
For those of you who would be interested, StudioRS was kind enough to work up some FMS Owners Club gear for us.
If you would like a T-Shirt, Hoodie, Coffee Mug or any other item of the nature, please check out the link. Lots of good stuff there.
There is lots of other stuff there so make sure you check it out.
So please, come in, enjoy, share, have fun and be nice to each other please.
-Wingspan: 1400mm (55.1 inch)
-Length: 1230mm (48.4 inch)
-Drive System: 4250 KV580 Brushless OutRunner Motor
-Speed Controller: 65A Brushless ESC w/ 5A SBEC
-Servo: 5X 9g metal gear and 1X 17g metal gear
-Retract System: Servoless Retracts
-Battery: 14.8V 2600mah 20C Li-Polymer
Adding pics courtesy of Banana Hobbies. Best pictures around and these are just some of my favorites.
|Mar 20, 2012, 08:43 PM|
|Mar 20, 2012, 08:44 PM|
Maiden & Final Thoughts
Here is the maiden flight of mine.
I am going to split this section into Final Thoughts and an area for Things to Note.
My final thoughts are simple, I love it. Its still pretty new to me so I have to let a little more of the new wear off before being completely biased in my assessment.
Things To Note.
1) Check the tow on the landing gear. Be sure to tighten the grub screw just above the wheel and maybe use some loctite to ensure it doesn't back out over time. Refer to my video on the Tear Down and Rebuild of the landing gear.
2) So far any 6 channel DSM2 RX from Spektrum has been unable to actuate the retractable landing gear. If you plan to or have purchased this plane, please use a 7 channel DSM2 or a DSMX RX for this plane. FMS is aware of the issue and hope to hear of a resolution on thier end soon.
3) Check the collar on the back of the motor. Dambit had his come off in flight which really messed up his plane. Caught it on fire. So please check that collar and loctite the grub screw on that.
|Mar 20, 2012, 09:19 PM|
|Mar 20, 2012, 09:23 PM|
I sure did. I had one ordered about 5 min after they came up. I messed up my order some how though but Raymond got it all worked out and said my FW-190 will ship tomorrow. I will be on vacation next week so I will be sweating it all friggin weak. LOL!
|Mar 20, 2012, 09:27 PM|
Orion, good idea starting this owners thread.
The motor was listed as 580KV on Raymonds site. Is that a typo or can Beltpilot confirm this?
|Mar 20, 2012, 09:44 PM|
Cool. Just checking because I'm not sure how my props will fair on a higher KV motor. I've tested them on the 500KV motor running on a 5s and they are fine. I guess they will be fine on 4s with a 580KV motor, but will have to test on 5s.
|Mar 21, 2012, 06:38 AM|
Recieved an e-mail from Raymond this morning. Package is in route to the good ole USA. Wow, thats fast. By the way, since it is airmail does this qualify as a flight review?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||fms warbird owners thread||warbird_cowboy||Electric Warbirds||123||Dec 08, 2014 07:33 PM|
|Discussion||FW 190 1400mm by FlyFly ...wow it's NOT FMS!||jbc||Electric Warbirds||222||Nov 12, 2014 02:29 PM|
|Discussion||FMS FW-190 800mm range||flyball||Electric Warbirds||130||Nov 02, 2014 12:38 PM|
|New Product||FMS 1400mm FW-190 Part II||Tommy D||Electric Warbirds||647||Jul 26, 2012 04:23 PM|
|Video||Formation Flying - FMS Stuka, Hobbico FW-190, Velocity-RC T-33s, and Tsunamis||bwoollia||Electric Plane Talk||0||Oct 23, 2011 03:45 PM|