|Feb 04, 2011, 02:41 PM|
Joined Jul 2010
Blade 450 3d
This is the new blade 450 3d heli by horizon hobby
not released in the USA but it has in the UK so here you go.
The Blade 450 3D gives intermediate to advanced heli pilots an outdoor ready-to-fly experience like no other. It comes out of the box equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. Its new and improved cyclic and tail servo provides crisper, cleaner response for added precision and stability while the new heading lock gyro that provides more control over the tail for additional control and confidence. The 450's aggressive new body and trim scheme make this Blade is one hot heli. And because it's flight tested at the factory, no pre-flight setup is required.
Like its predecessor, the RTF version of the Blade 450 comes equipped with Spektrum's advanced DX6i 2.4GHz DSMX 6-channel programmable aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i's DSMX technology offers other unique advantages like faster control response and innovative features such as ServoSync. ServoSync automatically re-sequences transmitted data so mixed servos receive their pulses at the same time so you can fly 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6115e Microlite receiver.
The Blade 450 is ready for everything from smooth hovering to 3D aerobatic flying and blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with state-of-the art electronics and mechanics you would expect to find in more expensive kits that take hours to build. It's even been flight-tested and had the rotors balanced at the factory so you don't have to do any setup. Simply charge its 3S 2200mAh 30C LiPo battery and fly.
Length: 655mm (25.8 in)
Rotor diameter: 720mm (28.4 in)
Height: 235mm (9.3 in)
Tail rotor diameter: 142mm (5.6 in)
Weight: 760g (26.9 oz)
Motor: E-flite 420H brushless outrunner, 3800Kv (installed)
Speed Controller: E-flite 35A Pro S-BEC Brushless (installed)
Receiver: Spektrum AR6115e DSMX™ Microlite Receiver (installed)
Swash Servos: E-flite DS76 Digital Sub-Micro (3) (installed)
Tail Servo: E-flite DS76T Digital Sub-Micro (installed)
Gyro: E-flite G210 Micro Heading Lock MEMS (installed)
|Feb 04, 2011, 06:43 PM|
|Feb 04, 2011, 10:34 PM|
|Feb 05, 2011, 12:16 AM|
Joined Jan 2011
kinda a half done blade 400 remade sadly!! but good for me since i bought the blade 400 ^_^... im preety sure with a couple servo upgrades and new main blades the blade 400 can out perform this heli by alot!
EDIT!!:: very happy they made this i can use the shorter tail servo rod in my blade 400 without having to cut the original down to size for new servo that are boom mountaid ^_^
+1 for replacement part hack
|Feb 05, 2011, 10:29 PM|
Joined Sep 2004
|Feb 05, 2011, 11:17 PM|
My Bad... I knew that and should have posted it, in my first thingie.
PS... I think warped main gears are becoming a standard. Hit and miss for sure.
|Feb 05, 2011, 11:20 PM|
Joined Apr 2009
Doesn't look like the new servos are up to the job. I wish they made the cages such that they'll accept other standard servos without need for filing down.
|Feb 07, 2011, 11:40 AM|
Also, I am glad they at least addressed some of the problems with the blade 400. It's not everything I hoped for, but seem to have made some progress at least. Maybe the next edition, after this one, will finally be worthy competition for a t-rex.
Also several other little things.
I think they may have upgraded the speed controller.
There is something different about the gears my main gear is black these main gears are white. Maybe they are using a better material they look thicker.
Also look under the gears and over the gears they have made some changes in the main shaft.
The tail region has changed a little you didn't used to be able to see the belt. Not sure if that is a great idea.
The landing gear also looks ... weaker.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||Blade 450 3D RTF/BNF!||DFflyer||Mini Helis||63||Apr 08, 2013 06:26 PM|
|New Product||New Blade 450 3D||choppersrule||Electric Heli Talk||0||Feb 03, 2011 10:08 PM|
|Wanted||WTT Blade MSR BNF plus cash for a 450, 250, or Blade 400 RX ready||jedi391||Aircraft - Electric - Helis (FS/W)||1||Jan 08, 2011 12:13 PM|
|Discussion||Blade 400 3D and E-Revo, or T-Rex 450 SE V2...||heliaddict22||Off-road Cars||2||Oct 22, 2008 10:51 PM|
|Discussion||TREX 450 or EFlite Blade 400 3D or Belt CP carbon?||emiliomuno||Mini Helis||7||Oct 02, 2008 07:22 PM|