hi
i got 7HV

i buy 2 brand pulse battery( red series ) 65C 5000MAH

the first flight i down after 2 min to use only 50% battery first 5 flight

the flight was slow and easy

second flight i just take off and make for 1 sec high pitch to check power

and the castle 160 got cut , and after 2 sec power back

i got 3 more battery pack and its didn't happed to me b4

maybe cause its new battery ? but its still didn't happen to me too

cell are balance and good


I speak with the seller that was very nice
And with some extra cash he upgrade the battery to the green ones

Today i make the same first 5 flight on 50%
and i got same problem again

I cant belive that its the battery again what should i check

This the only brand 65c that i try in this configeration , i got tp 65 c that thay not new as pulse , maybe new battery drow more then my tp cause she new ? Maybe its the cc setting after all

Ask me anything , please help me ,


governor RPM
spool up 5

head speed change rate 14

governor gain 17

2106
2162
2253

ratio - 8.466

cutoff
3.0
corent limiting 200A ( just now see that and i have changed to 240A )

soft cutoff

motor
start power 59

timing 7

PWM 8 KHZ

V3.27

thanks

sounds like the ESC is overheating

this is not heating

it can happens after less then 1 min

What error code you are getting?

Sounds like a bad solder joint from the motor to esc. It behaves that way when it loses a phase of the motor. Why don't you pull the data log and post it up here?