|Nov 19, 2012, 11:20 AM|
Rimfire 65cc problem
I have flown this set up for a little while
aeroworks 50cc ultimate
18lb with everything
3 blade biela 24x12
2 6s 5000mah
Ok now for the problem I bought a mejzlik 24x12 3 blade prop thinking I would get more out of a thinner blade !! Well I run the plane up and at 60% throttle it shuts off will not spool at 100 % I look at the data and it shows 9000 and 9500 rpm so I am guessing it is over spinning !! can I resolve this or should I look for a different prop any ideas or suggestions would help ! ps the 3 blade is for ground clearance had a 26x 13 2 blade to test had ground strike !
|Nov 19, 2012, 12:39 PM|
You may want have another look at your data. 12s is about 44v under load, that x motor kv = 7040rpm. In fact my 6s x2 show 42v. If your using a tach, is it set for a 3 blade prop?
Two things to watch for here, the extra weight of the cf 3 blade could be loading the esc beyond it capacity. The other is the throttle endpoints, I don't rely on the auto set features, I use the set endpoints to ensure 100% travel thru the Tx throttle range.
Use a know n wattmeter to verify whats happening. A 24/12/3 blade may be beyond esc and motors capability. fwiw Doug B
|Nov 19, 2012, 01:09 PM|
I just completed a 50cc pitts using a suppo 5345/8 motor,castle 160hv castle 20a pro bec and a biella 20x10 3 bladed prop with awsome results on 12s. I guess it could be prop issues but im not a pro on these matters.
|Nov 19, 2012, 06:13 PM|
the data I got was from the esc datalog I have run and flown it with a 24x12 3 blade these pics are from the neat fair this year I flew 10 or so flights . The problem came when I switched props same size just went from biela to mejzlic same size ! just trying to figure out the problem !! I put the biela prop back on and spun it up todat it ran fine and pulled well didnt fly but static test !!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||ESM Fw-190 D9 65cc rimfire||kahloq||Glow to Electric Conversions||66||Apr 01, 2013 05:16 PM|
|Wanted||Rimfire 65cc electric motor||JBAZ4||Aircraft - Electric - Power Systems (FS/W)||0||Aug 22, 2012 04:50 PM|
|Discussion||Rimfire 65cc, CC160 ans 12S 10000, is this a good 35% powerplant?||meloni||Giant Electric Planes||3||Aug 12, 2012 11:48 PM|
|Found||rimfire 65cc or equivalent motor||kremecheze||Aircraft - Electric - Power Systems (FS/W)||0||Apr 09, 2012 09:11 PM|
|Question||rimfire 65cc||airshipguy||Power Systems||10||Mar 27, 2012 01:44 PM|