|Oct 07, 2012, 03:14 PM|
"3D" Ignition Drop Down Diode for A123's
"3D" Ignition Drop Down Diode for A123's.
These are virtually the same as available from several mail order vendors. I just made a bunch of these up and will pass the savings to you!!!
For use with A123 batteries, these will drop the voltage to your ignition module by about 1.3vdc.
Please see the pics:
1. A set of diode rigs, ready to go!
2. My test battery (EP Buddy 2300 mAh LiFe)
3. Battery voltage (6.97vdc. It had already been running the cooling fan for a few minutes prior to this picture)
4. Voltage showing on my cooling fan (6.92vdc)
5. Voltage at the fan through the "3D" Drop Down Diode (5.37vdc (it was bouncing between 5.37 and 5.38vdc))
Approximately a 1.55vdc drop!
This little rig will give you about a 1.3 - 1.5vdc drop that could save your ignition module from dying from an over voltage situation (remember, your A123 will show over 7vdc directly off the charger...).
These go for close to $8, plus shipping from many on-line retailers. Get 'em from me for $6.50 each, with free shipping!!! Quanity discounts available (5+ units).
ImagesView all Images in thread
|Oct 07, 2012, 05:45 PM|
These are made with standard 1N4002 diodes (they have the "Motorla" 'M' on them) and from what data I can find on the web, the 1N4002 diodes are 1000v, 1A forward current, but can take 30A surge current.
RCExcel ignitions, for example, from what I've read, use only about 650mAh when running.
|Oct 08, 2012, 01:13 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||A123 Rx pack..... add diodes?????||SteveM||Batteries and Chargers||20||Jun 26, 2012 09:22 AM|
|Question||Silicon "dropping diode" choice for 2S1P LiFePO4 Rx airborne packs??||The PIPE||Radios||22||Oct 06, 2011 01:11 PM|
|Discussion||Zener diodes for spike suppression on A123 Rx packs?||stumax||DIY Electronics||6||Jun 23, 2010 08:21 PM|
|Discussion||Replacement diode for Align 5.1 step down||khaoz||Electric Heli Talk||3||Aug 30, 2008 07:24 PM|
|Zener Diode to Drop 3xQ830 li-Ion Voltage for Tiger Moth||AndrewsJr||Power Systems||2||Feb 24, 2002 11:04 PM|