Files

Pudknocker71 · Jun 28, 2008, 11:48 AM

Video I want to download failed on youtube for some reason. You're welcome to post here if you don't want your own thread. If you just need somewhere to post and refer too, this could be it.

This is not a funny video thread. Please keep it on topic.

turbodriven · Jun 28, 2008, 12:01 PM

LOL... looks like the camera FPS were matching the rotations on the spinner at first. Holding it still.

EDF30 · Jun 28, 2008, 01:05 PM

Don't post things like this. I'm an OBS type.

I've just spent 15 minuted trying to determine the exact rpm from the frequency, so I could then determine the camera FPS speed. I'ts a bit difficult to nail down the hum of the prop, and then try to determine the exact note. I think you're running betwwen a D7 and E7, maybe around 2500rpm.

Bill

Pudknocker71 · Jun 28, 2008, 03:07 PM

Couple of videos from today but not what you think. Took these for doppler readings.

http://www.youtube.com/watch?v=hFQ7GWu-BZs

Stryker 2st pass (0 min 7 sec)

Pudknocker71 · Jul 14, 2008, 04:53 PM

My Stryker maiden....

Stryker launch (1 min 44 sec)

By the way the Stryker 2st pass video above dopplered at 105. To bad it wasn't mine. I'd be lucky if mine did around 70. No good runs to read from. I'll try again next time.

Jun 28, 2008, 11:48 AM	#1
Pudknocker71 Registered User Debary, Fl. Joined Oct 2007 2,309 Posts	Generic Video thread. Video I want to download failed on youtube for some reason. You're welcome to post here if you don't want your own thread. If you just need somewhere to post and refer too, this could be it. This is not a funny video thread. Please keep it on topic. Files View all Files in thread spinner (6.70 MB) 165 views avi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Battle of Balsa Video Thread	Sean G.	3D Flying	25	Jul 12, 2005 09:36 AM
Yippee! gws video thread	kahuna_socom	Foamies (Kits)	2	Jan 23, 2005 11:48 PM
Rolling Circles Video Thread	Gordon	Sport Planes	2	Dec 13, 2004 04:47 PM
Ballistic Technology Video Thread	Xnaron	Electric Heli Talk	13	Nov 01, 2004 07:41 PM
Question Where is the Video- Thread???	diduel	3D Flying	2	May 09, 2004 12:47 PM

Files

RCG Sites

About RCG

Features

Tools

Media

Topics

Jun 28, 2008, 12:01 PM	#2
turbodriven 100mph club member NW O-town Joined Jun 2005 1,632 Posts	LOL... looks like the camera FPS were matching the rotations on the spinner at first. Holding it still.

Jun 28, 2008, 01:05 PM	#3
EDF30 Suspended Account Mercer Co. PA Joined Mar 2008 826 Posts	Don't post things like this. I'm an OBS type. I've just spent 15 minuted trying to determine the exact rpm from the frequency, so I could then determine the camera FPS speed. I'ts a bit difficult to nail down the hum of the prop, and then try to determine the exact note. I think you're running betwwen a D7 and E7, maybe around 2500rpm. Bill

Jul 14, 2008, 04:53 PM	#5
Pudknocker71 Registered User Debary, Fl. Joined Oct 2007 2,309 Posts	My Stryker maiden.... Stryker launch (1 min 44 sec) By the way the Stryker 2st pass video above dopplered at 105. To bad it wasn't mine. I'd be lucky if mine did around 70. No good runs to read from. I'll try again next time.