|Mar 06, 2012, 11:20 PM|
hobby partz led strips
making my first night flyer.
Does anyone know what the configuration is on these strips that are rated for 12v?
can they safely be run on 4S?
how many leds in series?
|Mar 12, 2012, 12:51 AM|
USA, CA, San Diego
Joined Jan 2008
I take it you're using these led strips:
If that's the case, then just run them off a 3S pack. DO NOT use a 4s pack...that is unless you wanna see them fry. With LEDs, more voltage does not mean brighter. Different colors will act differently at different voltages. For example, my ambers look dim at 8v but at 11v, they're fairly bright.
So to answer your other questions, you don't need any resistors. They're already soldered onto the LED strip. You can probably run as many in series as reasonable. For instance, I have about 60-90 leds in my flying wing.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Problems with LED Strips on 3s 610mah||TheDonski||Night Flying||6||Dec 31, 2011 11:26 AM|
|Discussion This is how i powered my LED strips.||ipjodan||Night Flying||7||Nov 20, 2011 08:06 AM|
|Discussion LED Light Strips||kushal_22||Power Systems||3||Nov 13, 2011 02:06 PM|
|Discussion Blue Lipo brand from Hobby Partz ?||Ldm||Batteries and Chargers||11||Sep 19, 2011 02:32 PM|
|Discussion LED Strips (Like UH LED Strips) Dim with Throttle||Bohh33||Night Flying||13||Aug 23, 2010 12:07 AM|