|Jun 14, 2013, 02:57 PM|
Joined Jul 2007
I am busy designing a gimbal for a canon 5d mark III to be used on rc helicopter.
I am planing on using brushless motor, but now the question is what sort of motors should I get. The camera weighs 2.6kg with the lense on ( I weighed it to check)
Also I was designing the gimbal for 3 axis but I can't find any 3 axis brushless gimbal controller, is it required to have 3 axis for filming or will 2 axis do just fine.
|Jun 15, 2013, 07:51 AM|
Why a Heli??? I ask because most would choose a multirotor not a heli for a camera of that size.
You should really be asking these questions/search in the multirotor forum. It has all the info you can digest. At this time the 3 axis add on boards are not out yet. To get 3 axis now you need two boards. IMO if you are in this for the long haul you need 3 axis. if you use two you will soon notice the yaw footage is unstable. The eye always picks the most obvious flaws.
I just finished up my 3 axis housing/gimbal and did a test shoot, it is the smoothest footage I have to date. Here is a clip of the gimbal housing/operation and a test clip in action.
On the Smugmug link, after you hit play, hit the dropdown in the lower right and select 1080p.
|Thread||Thread Starter||Forum||Replies||Last Post|
|New Product Team Rebel Design: Beholder GoPro Brushless Gimbal, Now 3rd Axis||Team.Rebel||Multirotor Talk||699||Nov 26, 2013 03:49 PM|
|Discussion Gimbal Design Principles||tomeparker||Multirotor Talk||10||Apr 18, 2013 12:55 AM|
|Discussion New simple design Gimbal auto stab.||antiguogrumete||Multirotor Talk||1||Feb 23, 2013 12:38 PM|
|Question Hunting for a Gimbal Design||spagoziak||Aerial Photography||0||Nov 09, 2011 05:47 PM|