SMALL - SMALL - Telemetry SMALL - Radio
Thread Tools
Old Feb 02, 2013, 08:50 PM
Registered User
Joined Jan 2013
6 Posts
Multi wii pro not powering Turnigy 9x reciever

Okay when i plug my turnigy 9x receiver into my multiwii pro (quad-copter plus) it does not get any power and the 6 leds on the board do not light up, but if I remove one BEC going from my ESC to my board and plug it into the receiver(instead of my board) either in channel 3 or the battery slot the receiver powers up and the board's leds light up but i obviously cant have one of my escs not plugged into my control board and i don't want to have to have a separate battery pack or buy an additional bec if i don't have to......I just had an epiphany but i will post this in case i fail. Could i reroute the two power wires of a bec cable to my receiver(so all of that works) and just plug the signal wire (3rd wire) in the control board? so the board can still control the esc and get enough power form the other 3
batmankicks is offline Find More Posts by batmankicks
Reply With Quote
Sign up now
to remove ads between posts
Old May 15, 2013, 11:26 AM
Registered User
Joined Oct 2004
3 Posts
I have the same problem with my Turnigy 9x receiver any ideas.
decker is offline Find More Posts by decker
Reply With Quote

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Brand New Turnigy 9X Radio with 3 recievers rpeker Aircraft - General - Radio Equipment (FS/W) 3 Jan 31, 2013 08:40 PM
Help! Multi wii pro control board batmankicks Multirotor Talk 6 Jan 26, 2013 08:25 PM
Sold FlySky modlule and Recievers (Turnigy 9X,9XR) Fentonflyers Aircraft - General - Radio Equipment (FS/W) 1 Jan 12, 2013 04:40 PM
Discussion Turnigy 9x receiver power on behaviour? boulevardier Radios 3 Jan 12, 2013 12:15 AM
Help! Turnigy 9x not powering up TheSelf Radios 3 Feb 21, 2012 06:20 PM