|Oct 30, 2004, 08:58 PM|
Engine Recomendations for 106" Aeronca"
Going to be aquiring a 106" Aeronca already built and covered. Not sure on the Manufacturer or any other details as of now. Do know that it was flown with a 4 stroke. I have some experience with 4 strokes, but would really like to put a gas engine in it or maybe a twin 4 stroke. I have tried searching any "Aeronca" and come up with the Bud Nosen kit. Does anyone else know of anyone else who may have made the Aeronca? I think this plane is also a 2 peice wing design. I want to get into scale and want a nice slow floater but can also handle a large engine for extra power and some fun.... Any suggestions on engine size or what your flying would be great....
Hey BILL sorry for the spelling!
|Oct 31, 2004, 12:26 AM|
Joined Feb 2004
Over the years I have seen everything from a Zenoah G-23 to a Homelite 25 to a Quadra 35 or Zenoah G-38 power a 1/4-scale Aeronca Champ. I have also seen Saito or OS 120 singles as well as OS 120 or 160 twins used when the owner wanted 4 stroke power. It's up to you, as the Champ doesn't seem to be very fussy about what powers it!
|Nov 01, 2004, 12:37 PM|
Thanks for the reply Bill. I think that I am going to wait the engine part out until after I get the plane and get it flight ready. I'd really like to put a gas or twin 4 stroke in it though. I've been reading the build threads to some of the other larger scale models in this section and there really a great help! I think once you go "big" you'll never go back! Cant wait to get the Aeronca!!
Thanks again for the help
|Nov 01, 2004, 01:28 PM|
United States, TX
Joined Jul 2003
Chris, I've built several of the Nosen kits (both the Champ and the Citabria) and I can tell you from experience that the Q-42 is the absolute best choice for it/them.
The G-23 will fly it, but it will be noticeably underpowered. For scale like airbatics, go with the Q-42/US-41.
Be careful to balance the aircraft properly and make it just a little nose heavy for the first few flights. That's a short coupled aircraft and can be twitchy if the CG is aft. Once you get used to it, move the CG back a little and it will do some respectable airbatics.
Also for the same reason, don't drag it in on landing or go too nose high on take off. I've seen other people tip-stall them in if they get sloppy near the ground.
You're right about the "never go back" thing.
You'll quickly get used to NOT having to wipe several rags of slime off the bottom of your gas aircraft as opposed to the glo fuel powered planes you've been flying. And you'll also find that flying the big ones are a lot more fun (oh, and more expensive to fix when you break 'em).
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Battery Recomendations for GWS Pico Stick- S||Mr.Dickles||Batteries and Chargers||4||Oct 10, 2002 08:34 PM|
|Recomendations for next e-heli?||JordanP||Electric Heli Talk||30||Feb 13, 2002 02:49 PM|
|Receiver Recomendations for ECO8 and RD6000S||JohnnyV||Electric Heli Talk||0||Aug 01, 2001 08:14 PM|
|Lite Stick Engine Choices for Newbie||Gman||Parkflyers||2||Jun 04, 2001 01:36 AM|
|prop recomendations for Honey Electric/ Electro bat||Eddy||Electric Plane Talk||4||Apr 22, 2001 05:20 PM|