HobbyKing.com New Products Flash Sale
 
Thread Tools
Old Nov 15, 2012, 10:18 AM
John B
Guest
n/a Posts
Crawford Collets 1580

I have a number of Crawford 1580 collets in very good condition. Can anyone
tell me what lathes these were made for?

--
+-----------------------[ SERVER SIGNATURE ]--+
| posted via http://www.polytechforum.com |
| Web, RSS and Social Media Interface to |
| uk.rec.models.engineering and other groups |
+---------------------------------------------+
Old Nov 24, 2012, 10:31 AM
Alan Bain
Guest
n/a Posts
Re: Crawford Collets 1580

In article <e6f28$50a515b9$43de0cc0$25802@news.flashnewsgroup s.com>,
John B <0f8503901d844703eea1acecb7a4938a_1412@example.com > wrote:

>I have a number of Crawford 1580 collets in very good condition. Can anyone
>tell me what lathes these were made for?
>

Well some of the collets I used in my Lorch-Schmidt lathe are marked 1580.
Are they 12.5mm diameter shank?

Similar collets were made by Lorch and Hardinge.

If you are thinking of selling, let me know (email address as in the
posting) as I have some gaps in my set which I would be pleased to fill !

Alan
Old Nov 24, 2012, 02:18 PM
John
Guest
n/a Posts
Re: Crawford Collets 1580

responding to
http://www.polytechforum.com/modelen...580-53335-.htm
, John wrote:

> alanb+news wrote:
>
> In article
> <e6f28$50a515b9$43de0cc0$25802@news.flashnewsgroup s.com>,
> John B <0f8503901d844703eea1acecb7a4938a_1412@example.com >
> wrote:

> >I have a number of Crawford 1580 collets in very good condition.

> Can anyone

> >tell me what lathes these were made for?
> >

> Well some of the collets I used in my Lorch-Schmidt lathe are marked
> 1580.
> Are they 12.5mm diameter shank?
>
> Similar collets were made by Lorch and Hardinge.
>
> If you are thinking of selling, let me know (email address as in the
> posting) as I have some gaps in my set which I would be pleased to fill
> !
>
> Alan
>
>
>

They are 12.5mm dia. What model of Lorch lathe uses them?

They are for sale now on eBay under Lorch Collest

John
Old Nov 24, 2012, 02:19 PM
John Baldwin
Guest
n/a Posts
Re: Crawford Collets 1580

responding to
http://www.polytechforum.com/modelen...580-53335-.htm
, John Baldwin wrote:

> alanb+news wrote:
>
> In article
> <e6f28$50a515b9$43de0cc0$25802@news.flashnewsgroup s.com>,
> John B <0f8503901d844703eea1acecb7a4938a_1412@example.com >
> wrote:

> >I have a number of Crawford 1580 collets in very good condition.

> Can anyone

> >tell me what lathes these were made for?
> >

> Well some of the collets I used in my Lorch-Schmidt lathe are marked
> 1580.
> Are they 12.5mm diameter shank?
>
> Similar collets were made by Lorch and Hardinge.
>
> If you are thinking of selling, let me know (email address as in the
> posting) as I have some gaps in my set which I would be pleased to fill
> !
>
> Alan
>
>
>

Alan,

I have 12 - 1/32, 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16,
11/32, 3/8

They are in very good condition.

I'm not a member of Polytechforum so i can't see you email address. You can
contacty me via ebay.

Regards

John
 


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold NIB HET 6904 fan with 1/8" collet and 4mm collet The Don Aircraft - Electric - Jets (FS/W) 1 Nov 14, 2012 07:12 PM
Sold Two NEW EMP 5055-580kv 1580 watt out-runner MNMadman Aircraft - Electric - Power Systems (FS/W) 4 Apr 15, 2012 11:15 PM
Help! KMS brushless 1580 KV what prop? Ospreyman Power Systems 13 Oct 02, 2011 05:04 PM
What GW Might Leave Crawford For Chas Life, The Universe, and Politics 2 Mar 22, 2005 11:25 AM