|Nov 26, 2011, 09:10 AM|
Joined Jan 2007
How do you turn OFF a switch on a DX-7 radio?
Hi to all,
I have a DX-7 and have mixed the aileron with the AUX2 because I am using two servos for the ailerons and need the end point adjustment for each.......I can get that to work , but I want to turn OFF the toggle switch to the AUX 2 in the top of the radio for saftey reasons.
So my question is how do I turn the toggle off....but still have the mix on at all times? I'm sure that this is simple.......but can't figure it out.
Thanks and happy flying!!
Nashville , TN
|Nov 26, 2011, 09:21 AM|
SYSTEM MODE, INPUT SELECT, AUX2, INH
It affects the action of the switch, not the mix.
See Input Select in the manual (page 38 in my version).
|Nov 26, 2011, 09:31 AM|
Wouldn't it be better to use Flaperon mode with dual ailerons?
You can still adjust endpoints, plus you get differential mode.
And if you want you can get flaps. (By default they are on, so you have to go into the flap system menu and set everything to zero to disable them)
|Nov 26, 2011, 10:22 AM|
This is one of those cases where before giving the answer you need to make sure the question is the right one.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||How do you turn off the 2.4 Ghz band?||Voguna||FPV Talk||4||May 05, 2011 03:11 PM|
|Discussion||How do you turn off the thumbnail photos||IBWALT||Thermal||25||Apr 22, 2011 07:32 PM|
|Discussion||How do I remove an on/off switch from ESC||drumbum||Power Systems||10||Apr 22, 2011 11:28 AM|
|Question||How do I set all dual rates on 1 switch with DX-7?||garyinpa||Beginner Training Area (Fuel)||3||Jul 03, 2009 01:29 PM|
|What to do, before you turn on your radio and take off CheckList||Patrick Plawner||Electric Plane Talk||31||Feb 11, 2005 05:42 PM|