 |
 |
 |
|
Mar 23, 2010, 05:44 AM
|
|
Australia, VIC, Rosebud
Joined Feb 2007
1,651 Posts
|
Looking for a Cellpro 10S connector
Does anyone know if any of the various HobbyKing balance connectors that they have will work with Turnigy LiPos and the Cellpro 10S?
Kev |
|
|
|
|
|
Mar 23, 2010, 06:15 AM
|
|
Haralson County GA. USA
Joined Oct 2004
34,211 Posts
|
The only other LiPoly balancing connector that uses the same size pins and spacing as the FMA ones are the Tunder Power ones. The Thunder Power housings are a bit larger and the keys and latches are different but can be trimed to fit. I have used many TP ones with my Cell 10.
|
 |
|
|
Mar 23, 2010, 08:04 PM
|
|
|
Australia, VIC, Rosebud
Joined Feb 2007
1,651 Posts
|
Thanks.
Would this be one? MKS 3 in 1 Batt-Balancer Adaptor for Thunderpower 2S-6S http://www.hobbycity.com/hobbycity/s...idProduct=8689 |
|
|
|
|
Mar 23, 2010, 08:46 PM
|
|
|
Haralson County GA. USA
Joined Oct 2004
34,211 Posts
|
I have no idea what that cable fits,perhaps a HK charger but it is 7 leads and the Cell Pro 10 takes a 6lead same spacing and connectors as TO 5S 6 lead which as I stated can be trimed to fit the CP10.
Photo of a modified TP6 lead to fit CP10 http://www.rcgroups.com/forums/attac...8&d=1220786344 Connected to CP10 http://www.rcgroups.com/forums/attac...1&d=1205453764 |
|
|
Last edited by everydayflyer; Mar 23, 2010 at 08:56 PM.
|
|
Mar 23, 2010, 11:18 PM
|
|
|
Hemet, California, United States
Joined Aug 2001
2,359 Posts
|
Hi,
I charge Hobby King Turnigy lipos on my 10S using adapters sold by FMA Direct. About $20.00 shipped. Want it fast with no hassle? Get it from FMA Direct. Good luck! Mickydee |
|
|
|
|
Mar 24, 2010, 12:18 AM
|
|
California
Joined Feb 2008
622 Posts
|
Here is a link to the Cellpro adapters:
http://www.fmadirect.com/cellpro_adapters.html Turnigy LiPo batteries apparently use JST-HX balance connectors According to the FMAdirect adapter information, you need one of the following adapters: Single channel: http://www.fmadirect.com/detail.htm?...271§ion=45 Dual channel: http://www.fmadirect.com/detail.htm?...279§ion=72 Note: I only plug one balance channel in at a time with the dual channel adapter. It has two adapter choices on it. In any case, be sure to read the manual for correct use. |
|
|
|
|
Mar 24, 2010, 06:46 AM
|
|
|
Australia, VIC, Rosebud
Joined Feb 2007
1,651 Posts
|
Thanks everyone!
Yes I know about the genuine adaptors. I have one but was thinkig of getting another to charge 2 packs at once. Out here though they cost about US$33 posted & when I saw similar adaptors at HK for about $7 I thought I would ask. I think though, with my limited knowledge it will be safer to go for another FMA Cheers Kev |
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Discussion cellpro 10s and field battery | xatled99 | FMA Direct | 4 | Mar 21, 2010 10:28 AM |
| Discussion CellPro 10s question | jhaywood | Batteries and Chargers | 2 | Mar 12, 2010 02:58 PM |
| Wanted WANTED a FMA CELLPRO 10S USB Interface Module for 2 way data communication | mechengineer03 | Aircraft - Electric - Batteries & Chargers (FS/W) | 6 | Sep 06, 2009 11:52 PM |
| Wanted Looking for Cellpro 10s charger | triguis | Aircraft - Electric - Batteries & Chargers (FS/W) | 1 | Dec 06, 2008 03:24 PM |
| Discussion Cellpro 4s or Cellpro 10s for charging multiple packs?? | windisevil!! | Batteries and Chargers | 16 | Mar 25, 2008 02:57 PM |
|
|