I hope someone makes custom retracts soon, like they did for the battery tray. The price is insane.

So i installed the new firmware. S-Bus and PPM works perfectly. However i cannot trigger the video recording on the Gimbal. Can somebody with a Zen for Nex-5n or Nex7 please try it out. Camera shutter works normally.
I can see the AUX3 channel trigger in the Assistent but it doesn't trigger video recording on the camera...

Originally Posted by miza

I hope someone makes custom retracts soon, like they did for the battery tray. The price is insane.

They have, video here, don't know the price, but It can't be more expensive

DJI S800 Retract Gear System

DJI S800 Retract Gear System (1 min 43 sec)

Originally Posted by Iceman575

So i installed the new firmware. S-Bus and PPM works perfectly. However i cannot trigger the video recording on the Gimbal. Can somebody with a Zen for Nex-5n or Nex7 please try it out. Camera shutter works normally.
I can see the AUX3 channel trigger in the Assistent but it doesn't trigger video recording on the camera...

Unfortunately that's a design limitation in the current trigger/firmware.

What’s changed?
 Fix the problem that the gimbal is bouncing when toggle the working mode switch.
 Fix the problem that the roll axis drifts quickly after the calibration of the gimbal.

What’s new?
 S-Bus & PPM Receiver supported (S-Bus -> AUX2,PPM ->AUX3).
 If DJI iOSD is used, the gimbal attitude information (   /     ) is available for display on screen.
 Video recording is available for Z15-N gimbal (AUX3).

ppm s-bus may come in handy

If anyone is looking at upgrading to the new retractable legs, I'd be interested in buying your complete fixed set! Or if anyone is not using there's.. Please PM me.

Originally Posted by RedSky

Unfortunately that's a design limitation in the current trigger/firmware.

So do i need to get a new HDMI converter just so i can trigger video recording ? I have not seen any new hardware like that at any shop...

Finding CG on S800+Zenmuse+GH2+6S 10000mAH Gens Ace LiPo. I suppose that zenmuse need to be power up(or?) if not it will hang and distrub CG( I will get inaccurate postion of CG)?
Where is the best way to tie a rope?

BTW can u share ur "XYZ" setting f you have similar equipment.
I am using middle stick for mounting GPS.

Cheers

I guys, just for show you my new hexa copter carbon frame with zenmuse.
I was owner of S800 and it is flying so better. No vibration.
With one 5000mha it can fly for 7 min. with 2 lipos for 13 min.

DroneFly D6 (5 min 4 sec)

@filmer nice!

Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed：
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types：
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2，PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).

Originally Posted by DJI INNOVATIONS

Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed：
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types：
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2，PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).

Is the new V2 hdmi-av hardware free to all existing z15 owner if not. What is the price ?

Originally Posted by DJI INNOVATIONS

Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed：
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types：
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2，PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).

My Z15 didn´t come with the USB cable... can I use the regular WKM cable? I know the answer but just to confirm.

Do you have pictures of the HDMI-AV Hardware ?

Regards

You can use the wkm cable.

The naza, wkm, z15 and OSD all use it. :-)

Yep it's a standard USB cable. Black berry mobile phone and Sony 3d glasses use the same cable for charging.
They all perform the same way. Tested