|Jul 18, 2013, 10:23 PM|
Joined Jun 2013
9C setup for the acacia 2 anyone?
I have a program for a full house with aileron to flap mixing for another plane. Works Great!
However the acacia only gets about 2 degrees of reflex in flaps and full travel down, and I have been at my wits end trying to figure out how to get the full camber changing, and elev to flap/ail.
Naturally I need full throw crow as well. you know....all that stuff.
I was surprised to find that it didn't have full span aileron function but It's the plane I have.
Programming the radio always makes me feel thick as a brick.
Any assistance is much appreciated.
|Jul 18, 2013, 10:44 PM|
Scott, i used the 9c for a few season. They work well, but programming is quite slow. You can get to everything you need, be patient. Using programmable mixes, you will need to do elevator-flap, then elevator-ail1, and same for elevator-ail2. That gets you snapflap, try about 4mm at full pull. Mix aileron-flap, yes. I think you can make that active in "normal" mode only, and keep it not functional in "landing" mode. Landing mode will need down elevator mixed to flap. Trying to remember how to do trailing edge camber...
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Anyone flying a Blade Nano CP X on a Futaba 8U or 9C?||rcav8or||Electric Heli Talk||1||Aug 13, 2013 06:18 PM|
|Sold||Custom FPV Setups for Anyone||DJO||FPV Equipment (FS/W)||5||Feb 04, 2013 05:51 PM|
|Sold||Custom FPV Setups for Anyone||DJO||FPV Equipment (FS/W)||0||Jan 26, 2013 05:42 PM|
|Help!||Wanted: Acacia 2 wing joiner||Gonesoaring2003||Multi Task F3X||3||Jan 25, 2013 01:27 PM|
|Discussion||Anyone got settings for a King 2 with 2.4gHz T6EX radio for 3D setup please?||turnbui||Micro Helis||0||Jun 13, 2009 06:00 PM|