|Nov 11, 2012, 08:16 AM|
Joined Jun 2006
my vacuum system setup,need suggestions
i am now trying to build my first DIY vacuum system, it's my first time and I meet with many problems,so I need some suggestions and help here
here is the setup for my system, is there something wrong within it ?
my problem is ,
1) my when my pump is off, the air will return into the system , so I add a mac valve and a check valve in front of the pump, so which one should be nearest to the pump ? the mac valve or the check valve ?
2)there is an arrow printed on my mac valve , which direction should be installed ? should the arrow point to the pump or the bags ?
Thanks in advance !
|Nov 11, 2012, 02:01 PM|
about everything you need to know is here
the MAC valve lets the vac pumps start unloaded and will extend its life. My system gets used infrequently - i didnt bother with a MAC valve
Regards and happy bagging
|Nov 20, 2012, 11:48 PM|
Portland Intl, Oregon, United States
Joined Jul 2003
I didnt use a MAC valve either. Actually never heard of them.
When I built my system, I just put a small hole in the hose between the check valve and the pump. (used a pin to poke the hole)
It lets the vacuum bleed off at the pump but not on the on the bag side of the check valve. I tested it and it doesn't seem to lessen the amount of vacuum much either.
Simple fixes are sometimes the best.
|Nov 22, 2012, 12:09 PM|
Joined Feb 2008
MAC is simply the name of the manufacturer.This type of valve is used on many industrial and packaging machines for controlling compresed air or vacuum.
|Nov 22, 2012, 12:23 PM|
Really depends on the solenoid(Mac) valve. Is it a sealing type or exhaust type? If its an exhaust type, the arrow would need to point to the pump, and when it closes, it will bleed the pump side back to atmosphere pressure. Easy way to tell is to put air on each port individually. If the solenoid is closed, one port will have air escaping out the top of the valve. This is the exhaust type.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||need suggestions for motor setup.||igotit||Racing Boats - Electric||15||Oct 29, 2012 09:24 AM|
|Question||we are looking for a GOOD vacuum cleaner..any suggestions ?||KCinNC||Chit Chat||19||Oct 22, 2012 11:31 PM|
|Question||ImmersionRC 5.8Ghz setup suggestions needed||nscheffer||FPV Talk||0||Jun 24, 2012 03:33 AM|
|Discussion||Need suggestion for the setup||redblur||Multirotor Talk||0||Jun 10, 2012 11:44 AM|
|Discussion||Ordering my initial setup, final suggestions please!||aviator4934||Beginner Training Area (Aircraft-Electric)||28||Apr 05, 2012 04:21 PM|