|Dec 14, 2012, 08:46 AM|
Opening JR 10X?
Just picked one of these up from a friend and wonder what's involved in getting the case open. Thinking of checking/replacing the backup battery and possibly a backlight kit.
On prior radios only a few screws and the back comes off, but this one looks to be quite a bit more involved.
Anyone successfully had one apart?
|Dec 14, 2012, 04:27 PM|
Joined Nov 2012
Work carefully and slowly.
One thing to be careful of is the two small snap roll switches at the top of the back case. Easily broken.
The four allen head screws in the antenna mount have to be removed.
Be sure to remove the screws behind the battery pack and on the bottom of the transmitter.
You can remove the two rubber pads on the rear of the case.
Be very careful if you go as deep as the touch screen and LCD. Their cables are fragile and there is no replacements according to JR.
It's a great TX.
|Dec 14, 2012, 08:54 PM|
Joined Jul 2006
I have had mine open to replace the module pins that were damaged by a defective Fly Dream module.
Not a job for the faint at heart but dueable
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted Looking to trade a JR 10x Helicopter Radio for an 10x Airplane or comparable.||daronj||Aircraft - General - Radio Equipment (FS/W)||11||Dec 21, 2012 02:50 PM|
|For Sale JR 10X A/S w/FM module - 2 Rx - JR case $175 Shipped||NHmoose||Aircraft - General - Radio Equipment (FS/W)||4||Dec 05, 2012 06:44 PM|
|For Sale Jr 10x for sale||drice||Aircraft - General - Radio Equipment (FS/W)||3||Mar 28, 2012 12:45 AM|
|Wanted JR 10x Transmitter Wanted||NHmoose||Aircraft - General - Radio Equipment (FS/W)||5||Mar 03, 2012 11:50 PM|
|Help! JR 10X Elevator trim backward (opening the radio)||PatternFlyer||Radios||4||Nov 26, 2009 07:01 AM|